ProLiant DL365 Gen10+ - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL365 Gen10+ HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Model | ProLiant DL365 Gen10+ |
| Brand | HP |
| Form Factor | 1U Rack |
| Processor | AMD EPYC 7003/7002 series, up to 64 cores |
| Memory | DDR4-3200, up to 2TB (16 slots) |
| Storage | Up to 8 SFF SAS/SATA/SSD hot-plug drives |
| Network | Embedded 4x 1GbE plus optional 10/25GbE |
| Power Supply | Dual hot-plug 800W-1600W, 80 PLUS Platinum |
| Dimensions (HxWxD) | 4.29 x 43.46 x 69.22 cm (1U) |
| Weight | Approximately 16 kg (35 lbs) |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Management | HP iLO 5 (Integrated Lights-Out) |
| Cooling | Hot-swap fans, redundant if configured |
| Maintenance | Tool-less access, hot-swap components |
| Safety Certifications | UL, CSA, CE, FCC Class A, etc. |
| Spare Parts Availability | Through HP authorized resellers and support |
| Repairability | Modular design, customer self-repair (CSR) parts |
| Energy Efficiency | Supports HP Power Manager, energy-saving modes |
| Warranty | 3-year limited warranty (extendable) |
Frequently Asked Questions - ProLiant DL365 Gen10+ HP
How do I access the HP iLO remote management interface?
Press the iLO button on the front panel or use the dedicated iLO network port. Assign an IP address via DHCP or through the iLO configuration utility during POST. Then connect via web browser using the assigned IP. Default credentials are typically printed on the server tag.
What are the supported operating systems for ProLiant DL365 Gen10+?
This server supports Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi, and Citrix Hypervisor. Always check the HP Server Compatibility Matrix for the latest list.
How do I install additional memory in the server?
Power off the server, remove the top cover, locate the 16 DIMM slots grouped in 8 per CPU. Install DDR4-3200 ECC RDIMM or LRDIMM following the sequential population rules printed on the chassis. Fill slots with the same capacity and type for optimal performance.
How can I replace a failed hard drive?
The server supports hot-plug drives. Identify the failed drive via the LED indicator (amber/red). Press the release button to unlock the carrier, then pull the drive out. Insert a new drive of the same type (SAS or SATA) into the empty slot and lock it. The controller will automatically rebuild the array if configured.
What is the maximum internal storage capacity?
With 8 SFF hard drive bays, you can install up to 8 x 2.5-inch drives. Using high-capacity SSDs (e.g., 3.84TB each), total raw capacity can reach over 30TB. Optional NVMe drives are supported on specific configurations.
How do I update the firmware on this server?
Use HP Service Pack for ProLiant (SPP) which is a bootable ISO. Download from HP support, mount it via iLO virtual media, and boot the server. The SPP will detect and update BIOS, iLO, drivers, and other firmware automatically. Alternatively, use the HP Smart Update Manager (SUM) in the OS.
How do I reset the iLO password if forgotten?
If you have physical access, you can use the iLO reset button on the system board. Alternatively, boot the server and interrupt POST to access the iLO configuration utility (press F8) to reset the user account. If iLO is unresponsive, a cold reset by removing power and CMOS battery may help.
What are the recommended cleaning procedures?
Power off and disconnect all cables. Use compressed air to blow dust from vents, fans, and heatsinks. Avoid using liquids. Clean the front bezel with a soft, lint-free cloth slightly dampened with water. Ensure the server is completely dry before restoring power.
How do I troubleshoot a server that won't start?
Check the power LED on the front panel. If off, verify power cords and PSU module connections. Listen for beep codes—refer to the beep code table in the manual. If the server starts but no display, reseat RAM and CPU. Use iLO to view system event logs for error details.
Where can I find spare parts or extend the warranty?
Contact HP Parts Store or an authorized reseller. Use the HPE PartSurfer tool online to identify parts by serial number. For warranty extension, purchase HP Care Pack services within the first year. Many parts are customer self-repair (CSR) and can be ordered directly.
User questions about ProLiant DL365 Gen10+ HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL365 Gen10+ - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL365 Gen10+ by HP.
USER MANUAL ProLiant DL365 Gen10+ HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL365 Gen10+
Category : Server