KTH 10.164 W - Range hood Kernau - Free user manual and instructions
Find the device manual for free KTH 10.164 W Kernau in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker hood / Range hood |
| Model | KTH 10.164 W |
| Brand | Kernau |
| Color | White |
| Installation Type | Wall-mounted chimney hood |
| Width | 100 cm |
| Depth | 50 cm |
| Height (min-max) | 60 - 110 cm |
| Weight | 15 kg |
| Motor Power | 240 W |
| Airflow Capacity | 720 m³/h |
| Noise Level (max) | 65 dB |
| Number of Speeds | 3 + intensive |
| Control Type | Electronic push button |
| Lighting | 2 x LED bulbs |
| Filter Type | Aluminum grease filter |
| Duct Diameter | 150 mm |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Main Functions | Air extraction / recirculation |
| Maintenance | Wash aluminum filters in dishwasher |
| Safety Features | Thermal protection motor |
| Spare Parts Availability | Available from manufacturer |
Frequently Asked Questions - KTH 10.164 W Kernau
How to install the Kernau KTH 10.164 W range hood?
The installation should be done by a qualified professional. Ensure the hood is placed at least 65 cm above an electric hob and 75 cm above a gas hob. Connect the duct to the exhaust outlet of 150 mm diameter and fix the chimney to the wall securely.
How do I clean the grease filters?
The aluminum grease filters can be removed by pulling the handle. Wash them in a dishwasher on a normal cycle or by hand in warm soapy water. Dry them thoroughly before reinstalling.
Can this hood be used in recirculation mode?
Yes, the KTH 10.164 W supports recirculation mode when carbon filters are installed. These filters are not included and must be purchased separately for non-vented installations.
How to replace the LED bulbs?
First, switch off the power supply. Access the LED bulbs after removing the grease filter. Twist the bulb to unlock it and replace with a new LED bulb of the same type. Do not touch the new bulb with bare hands, use a cloth.
What do the control panel buttons do?
The panel features speed selection buttons (1, 2, 3, and intensive boost), a light on/off button, and a timer function if present. Press the intensive button for 10 minutes then it returns to the previous speed automatically.
What is the noise level of this hood?
At normal speeds, the noise level ranges from 50 to 60 dB. In intensive mode it can reach 65 dB. Use the lower speeds for quieter operation during daily cooking.
Does this hood require a chimney/duct?
For extraction mode, a duct of 150 mm is required to vent air outside. For recirculation mode, no duct is needed, but carbon filters must be installed.
How to reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the speed 3 button for about 3 seconds until the indicator goes off. This resets the filter saturation memory.
Is professional installation recommended?
It is strongly recommended to have a certified electrician handle the electrical connection and mounting. Improper installation can cause electrical hazards or poor performance.
What is the warranty period for the Kernau KTH 10.164 W?
The standard warranty is 24 months from the purchase date, covering manufacturing defects. Keep your receipt and register the product online to extend the warranty if applicable.
User questions about KTH 10.164 W Kernau
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KTH 10.164 W - Kernau and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KTH 10.164 W by Kernau.
USER MANUAL KTH 10.164 W Kernau
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kernau
Model : KTH 10.164 W
Category : Range hood