Kernau

KTH 11.161 B - Range hood Kernau - Free user manual and instructions

Find the device manual for free KTH 11.161 B Kernau in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Kernau KTH 11.161 B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Built-in cooker hood
Brand Kernau
Model KTH 11.161 B
Installation type Built-in slide-out
Color / Finish Black glass
Dimensions (W x D x H) 600 x 500 x 150 mm
Net weight 8.5 kg
Power supply 220-240 V ~ 50 Hz
Connected load 278 W
Motor power 250 W
Extraction capacity (max) 650 m³/h
Number of speeds 3
Control type Slider + push buttons
Lighting 2 x 1.5 W LED
Grease filter 2 x aluminium washable
Duct diameter 150 mm
Exhaust type Top or rear outlet
Recirculation mode Yes (optional carbon filter)
Noise level (max) 65 dB(A)
Energy efficiency class A
Safety features Overheat protection, touch-safe housing
Maintenance Wash filters regularly, replace carbon filter if used
Spare parts availability 10 years after discontinuation

Frequently Asked Questions - KTH 11.161 B Kernau

How do I install the Kernau KTH 11.161 B range hood?
Install the hood at a height of 65-75 cm above a gas hob or 50-65 cm above an electric hob. Connect the duct to the 150 mm outlet and secure the body to the cabinet. For recirculation mode, add the optional carbon filter.
How often should I clean the grease filters?
Wash the aluminium grease filters every 2-3 months in warm soapy water or a dishwasher at low temperature. Reassemble only after they are fully dry.
Can I use the hood in recirculation mode?
Yes, if ducting outside is impossible. Fit the carbon filter (not supplied) and ensure the airflow is redirected back into the kitchen.
What kind of lighting does the KTH 11.161 B use?
It uses 2 LED bulbs of 1.5 W each, offering bright and energy-efficient illumination over the cooking surface.
How do I switch the speeds and light on/off?
Use the slider switch to select speed 1, 2, or 3. Press the light button to toggle the LED lights on and off.
Why is my hood making more noise than usual?
Check if the aluminium filters are clogged. Clean them regularly. Also ensure the ducting is free from obstructions and properly sealed to reduce vibration.
Which carbon filter is compatible with this model?
Use a standard 150 mm circular carbon filter designed for KTH series hoods. You can order it from Kernau spare parts service.
Can I control the hood with a remote control?
No, the KTH 11.161 B is equipped with manual controls only (slide switch and light button).
What is the noise level at maximum speed?
The maximum noise level is 65 dB(A), which is comparable to a quiet conversation.
Is the hood allowed to be used without the grease filters?
Never operate the hood without grease filters. The filters protect the motor from grease deposits and ensure safe, efficient operation. Always keep them installed during use.

User questions about KTH 11.161 B Kernau

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual KTH 11.161 B - Kernau and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KTH 11.161 B by Kernau.

USER MANUAL KTH 11.161 B Kernau

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Kernau

Model : KTH 11.161 B

Category : Range hood