M2-10DVC - Subwoofer Sound Ordnance - Free user manual and instructions
Find the device manual for free M2-10DVC Sound Ordnance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Sound Ordnance |
| Model | M2-10DVC |
| Speaker Size | 10 inches |
| Voice Coil Configuration | Dual 4-ohm voice coils |
| Impedance Options | 2 ohms or 8 ohms |
| Recommended Amplifier Power | 250W RMS |
| Peak Power Handling | 500W |
| Frequency Response | 30 Hz - 300 Hz |
| Sensitivity | 86 dB |
| Mounting Depth | 5.5 inches |
| Cutout Diameter | 9.25 inches |
| Cone Material | Polypropylene |
| Surround Material | Rubber |
| Recommended Enclosure | Sealed or ported |
| Sealed Enclosure Volume | 0.75 - 1.0 cu ft |
| Ported Enclosure Volume | 1.25 - 1.75 cu ft |
| Cleaning Instructions | Wipe with a dry cloth |
| Safety Instructions | Ensure proper polarity and ventilation |
| Spare Parts | Available through authorized dealers |
| Overall Diameter | 10 inches |
| Net Weight | 10 lbs |
| General Maintenance | Periodically check speaker connections |
Frequently Asked Questions - M2-10DVC Sound Ordnance
What does DVC mean in the model M2-10DVC?
DVC stands for Dual Voice Coil. This subwoofer has two voice coils, allowing flexible wiring configurations to match your amplifier's impedance.
How do I wire the subwoofer for a 2-ohm load?
Connect the two voice coils in parallel. Connect the positive terminals together and the negative terminals together, then connect to the amplifier.
How do I wire the subwoofer for an 8-ohm load?
Connect the two voice coils in series. Connect the positive of one coil to the negative of the other, then use the remaining positive and negative terminals to connect to the amplifier.
What is the recommended power handling for this subwoofer?
The M2-10DVC handles 250W RMS and 500W peak. An amplifier delivering 250-300W RMS is ideal.
What type of enclosure should I use?
This subwoofer works in both sealed and ported enclosures. For sealed boxes, use 0.75-1.0 cu ft. For ported, use 1.25-1.75 cu ft.
How do I break in my new subwoofer?
For the first 10-15 hours, play music at moderate volume with varied frequencies. This allows the suspension to loosen and improves performance.
What is the correct crossover frequency to set?
Set your amplifier or head unit's low-pass filter to 80Hz for most music. For SPL, you can go slightly higher.
Can I use this subwoofer in a vehicle with a factory stereo?
Yes, but you will need a line output converter and an external amplifier to deliver proper power.
How do I clean and maintain the subwoofer?
Use a soft dry cloth to wipe the cone and surround. Avoid moisture and harsh chemicals.
What should I do if the subwoofer produces distortion?
Check the wiring for loose connections, verify the enclosure is sealed properly, and ensure the gain is not set too high on the amplifier.
User questions about M2-10DVC Sound Ordnance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual M2-10DVC - Sound Ordnance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M2-10DVC by Sound Ordnance.
USER MANUAL M2-10DVC Sound Ordnance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sound Ordnance
Model : M2-10DVC
Category : Subwoofer