Sound Ordnance

M2-12DVC - Subwoofer Sound Ordnance - Free user manual and instructions

Find the device manual for free M2-12DVC Sound Ordnance in PDF.

📄 9 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Sound Ordnance M2-12DVC - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Subwoofer
Brand Sound Ordnance
Model M2-12DVC
Category Car Audio Subwoofer
Driver Size 12 inches
Voice Coil Configuration Dual 4-ohm voice coils
Power Handling (RMS) 250 watts
Power Handling (Peak) 500 watts
Impedance (Switchable) 2 or 8 ohms
Frequency Response 30 - 250 Hz
Sensitivity 87 dB (2.83V/1m)
Recommended Enclosure Type Sealed or vented
Recommended Sealed Box Volume 0.8 cubic feet
Recommended Ported Box Volume 1.5 cubic feet
Mounting Depth 5-1/8 inches
Cutout Diameter 10-7/8 inches
Cone and Surround Material Polypropylene cone with rubber surround
Magnet Type High-strength ferrite magnet
Terminal Type Screw terminals
Net Weight 10.5 pounds
Main Features Dual voice coil for wiring flexibility, rubber surround, high power handling
Maintenance and Cleaning Wipe with a soft, dry cloth; avoid moisture and harsh chemicals
Safety Instructions Disconnect power before installation; mount securely; prevent short circuits
Repair and Spare Parts No user-serviceable parts; contact an authorized dealer for service
General Information For optimal performance, match amplifier power output to the subwoofer and use a properly sized enclosure

Frequently Asked Questions - M2-12DVC Sound Ordnance

How do I wire my Sound Ordnance M2-12DVC dual voice coil subwoofer?
The M2-12DVC has two 4-ohm voice coils. You can wire them in parallel for a 2-ohm load or in series for an 8-ohm load. Choose the configuration that matches your amplifier's stable impedance at the intended power level.
What enclosure is recommended for this subwoofer?
For best performance, use a sealed enclosure with 0.8 cubic feet of internal volume, or a ported enclosure with 1.5 cubic feet tuned to around 35 Hz. Always model the enclosure to match your listening preferences.
How much power should I give this subwoofer?
The subwoofer is rated at 250 watts RMS and can handle 500 watts peak. An amplifier delivering between 200 and 300 watts RMS at the chosen impedance is ideal for reliable operation.
Can I install this subwoofer in my home theater?
While it is designed for car audio, it can be used in a home theater with a suitable enclosure and an amplifier that supplies the correct impedance and power. However, note that it is optimized for vehicle cabin acoustics.
How do I break in a new subwoofer?
Play music with moderate bass for 20 to 30 hours at low volume, then gradually increase to full power. This loosens the suspension and improves low-frequency response over time.
What is the difference between sealed and ported enclosures for this sub?
A sealed enclosure provides tighter, more accurate bass with reduced cone excursion, while a ported enclosure offers more output and low-frequency extension at the cost of less control. Choose based on your listening taste.
How do I clean the M2-12DVC subwoofer?
Use a soft, dry cloth to gently wipe the cone and surround. Do not use water, solvents, or compressed air, as they can damage the materials.
What wires or terminals does the subwoofer use?
The subwoofer features screw terminals that accept up to 8-gauge speaker wire. Ensure a tight and corrosion-free connection for optimal performance.
Can I mount this subwoofer in a free-air (infinite baffle) setup?
No, the M2-12DVC is designed for enclosed installations only. Running it in free air can cause damage due to lack of damping and improper cone control.
Is there a warranty and how can I get repair service?
Sound Ordnance products typically carry a 1-year limited warranty. For repair service, contact your authorized dealer or Sound Ordnance support with proof of purchase. Do not open the subwoofer, as this voids warranty.

User questions about M2-12DVC Sound Ordnance

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Subwoofer in PDF format for free! Find your manual M2-12DVC - Sound Ordnance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M2-12DVC by Sound Ordnance.

USER MANUAL M2-12DVC Sound Ordnance

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Sound Ordnance

Model : M2-12DVC

Category : Subwoofer