Aluratek

APBL01FSB - Power bank Aluratek - Free user manual and instructions

Find the device manual for free APBL01FSB Aluratek in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Aluratek APBL01FSB - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type de produit Batterie externe (power bank)
Marque Aluratek
Modèle APBL01FSB
Capacité de la batterie 10000 mAh
Entrée Micro USB (5V/2A)
Sortie 2 ports USB-A (5V/2.1A max)
Nombre de ports 2 ports de sortie USB-A
Dimensions 98 x 44 x 22 mm
Poids 180 g
Matériau Aluminium et plastique ABS
Couleur Noir
Indicateur LED Oui, 4 LED pour le niveau de charge
Fonctions principales Recharge de smartphones, tablettes et autres appareils USB
Protection intégrée Protection contre les surcharges, surintensités et courts-circuits
Recharge simultanée Possible pour deux appareils en même temps
Entretien et nettoyage Essuyer avec un chiffon doux et sec. Ne pas utiliser de liquides.
Sécurité Ne pas exposer à l'eau, à la chaleur excessive ou aux chocs.
Pièces détachées et réparabilité Batterie non remplaçable. Réparation non recommandée, contactez le fabricant.
Informations générales Voyage-friendly, conforme aux normes de transport aérien (chargeur portable)

Frequently Asked Questions - APBL01FSB Aluratek

How do I charge the Aluratek APBL01FSB power bank?
To charge the power bank, connect it to a wall charger or a computer using the included Micro USB cable. Plug the cable into the input port (Micro USB) and the other end into a USB power source. The LED indicators will show the charging status; all four LEDs lit means it is fully charged.
How many times can it charge my phone?
The capacity of 10,000 mAh can charge a typical smartphone (with a battery around 3,000 mAh) approximately 2-3 times, depending on phone model and usage. The actual number varies based on efficiency and device health.
Can I charge two devices at the same time?
Yes, the APBL01FSB has two USB-A output ports. You can connect two devices simultaneously and charge both at a total output of up to 2.1A. Note that the charging speed may be lower when two devices are used.
How do I know when the power bank is fully charged?
The LED indicators on the side of the power bank show the charging level. While charging, the LEDs light up progressively. When all four LEDs are solid, the power bank is at 100% capacity.
Is this power bank compatible with my smartphone?
The USB output is standard, so it works with all devices that charge via a USB cable, including Android and iOS smartphones, tablets, Bluetooth headphones, and more. Ensure your device requires less than 2.1A for optimal charging.
What should I do if the power bank is not charging or not charging my device?
First, check that the cable is firmly connected to both the power bank and your device. Try a different cable or device to isolate the issue. If the power bank itself does not charge, ensure the input cable is intact and the wall adapter provides sufficient power (5V/2A recommended). If problems persist, the power bank might be defective or its battery depleted after long storage.
How should I clean and maintain the power bank?
Keep the power bank in a dry place and clean it with a soft, dry cloth to remove dust or stains. Never use liquids or abrasive cleaners. Avoid exposing it to high humidity or extreme temperatures.
Is it safe to leave it charging overnight?
The APBL01FSB has built-in protection against overcharging, so it is generally safe. However, it is recommended to unplug it once fully charged to prolong battery lifespan and avoid potential hazardous situations.
Can I take this power bank on an airplane?
Yes, portable chargers with a capacity up to 100Wh are allowed in carry-on luggage. The 10,000mAh battery (approximately 37Wh) is well below the limit. Make sure to carry it in your hand baggage and not in checked luggage.
What is the warranty or support policy?
Aluratek offers a limited warranty for this product. Refer to the user manual or contact Aluratek support for details. For troubleshooting, you can also consult the manual's FAQ section or visit the official website for additional resources.

User questions about APBL01FSB Aluratek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power bank in PDF format for free! Find your manual APBL01FSB - Aluratek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APBL01FSB by Aluratek.

USER MANUAL APBL01FSB Aluratek

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Aluratek

Model : APBL01FSB

Category : Power bank