B65 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free B65 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Brand | ACTi |
| Model | B65 |
| Image Sensor | 1/2.7" Progressive CMOS |
| Max Resolution | 1920 x 1080 at 30 fps |
| Lens Type | Manual varifocal 2.8-12mm CS mount |
| Minimum Illumination | 0.05 lux (color), 0.01 lux (B/W) |
| Compression | H.264, MJPEG |
| Network Interface | RJ-45 10/100 Mbps Ethernet |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af, 12V DC |
| Dimensions | 120 x 70 x 60 mm |
| Weight | 450 g |
| Housing | Metal, weatherproof IP66 |
| Mounting | Wall mount and ceiling mount included |
| Operating Temperature | -20°C to 50°C |
| Storage | microSD card slot for local recording |
| Video Output | Composite CVBS 1.0 Vp-p |
| Connectivity | Two-way audio (line in/out) |
| Safety Features | Tamper detection, secure HTTPS access |
| Maintenance | Clean the lens with a soft dry cloth; regularly check seals and cables |
| Spare Parts & Repairability | Replacement lens, bracket, and power board available; modular design for easy servicing |
| Warranty | 3-year limited warranty |
Frequently Asked Questions - B65 ACTi
What is the default IP address of the ACTi B65 camera?
The default IP address is 192.168.0.100 with a subnet mask of 255.255.255.0. To access it, set your PC to a compatible IP range and open a web browser.
How do I reset the camera to factory defaults?
Press and hold the reset button (located near the Ethernet port) for 10 seconds while the camera is powered. The camera will reboot with factory settings. Your settings (including password) will be lost.
Can I use the camera outdoors?
Yes, the ACTi B65 is rated IP66, meaning it is fully protected against dust and strong water jets. It can operate in temperatures from -20°C to 50°C, making it suitable for most outdoor environments.
How to set up motion detection?
In the web interface, go to Motion Detection under the Event tab. Enable motion detection and draw one or more detection zones. Adjust the sensitivity and threshold, then set an alarm action like email or recording.
What power options does the B65 support?
The camera supports Power over Ethernet (PoE) (IEEE 802.3af) and a 12V DC input. For PoE, just connect a PoE switch or injector. For DC, use the supplied adapter. Never apply both simultaneously.
How can I access the camera remotely over the internet?
For remote access, configure port forwarding on your router or use the ACTi NVR cloud service. Enable HTTPS/SSL for security, and set a strong admin password.
Does the camera support audio?
Yes, the B65 has a built-in microphone and speaker output via line in/line out. You can enable two-way audio in the Audio settings of the web interface.
How to record video locally?
Insert a microSD card (up to 256GB) into the slot. In the Storage settings, choose the card and set a recording schedule. The camera records on the card even if the network is lost.
What is the maximum resolution and frame rate?
The ACTi B65 offers a maximum resolution of 1920 x 1080 at 30 fps. It also supports 720p and D1 modes to save bandwidth and storage.
How to clean and maintain the camera?
To maintain optimal image quality, clean the lens only when necessary using a microfiber cloth. Do not use water or solvents. Check the housing seals and cables periodically for damage. The camera is designed for modular repair – spare parts such as the lens, bracket, and power board are available from ACTi.
User questions about B65 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual B65 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B65 by ACTi.