KCM-3311 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free KCM-3311 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ACTi |
| Model | KCM-3311 |
| Product Type | Indoor Network Security Camera |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 x 1536) |
| Frame Rate | Up to 30 fps |
| Lens Type | Fixed Focal Length |
| Focal Length | 2.8 mm |
| Angle of View | Approx. 80° (horizontal) |
| IR LEDs | Built-in, Range up to 10 m |
| Video Compression | H.265, H.264, MJPEG |
| Network Connection | Wired Ethernet (RJ-45 10/100 Mbps) |
| Protocols | IPv4, IPv6, TCP, UDP, HTTP, HTTPS, RTSP, ONVIF |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | Max 5 W |
| Dimensions (L x W x H) | 72 x 72 x 27 mm |
| Weight | 180 g |
| Housing | Plastic (White) |
| Mounting | Ceiling or Wall Mount |
| Operating Temperature | 0°C to 50°C |
| Storage | MicroSD Slot (max 128 GB) |
| Security | Password Protection, IP Filtering, HTTPS Encryption |
| Included Accessories | Mounting Kit, QIG, Software CD |
| Care and Cleaning | Use a soft, dry cloth; avoid water or solvents. |
| Spare Parts | Contact authorized ACTi dealer for genuine parts. |
| Repairability | Not user-serviceable; return to qualified service center. |
Frequently Asked Questions - KCM-3311 ACTi
How do I reset the ACTi KCM-3311 to factory defaults?
Locate the reset button on the camera. While powered on, press and hold it for 10 seconds. The LED indicator will flash to confirm the camera has been reset to **factory settings**.
What is the default IP address of the camera?
The default IP address is 192.168.0.100. To find the camera on your network, use the ACTi IP Utility tool or set your PC to the same subnet.
How do I install the camera?
Mount the camera on a ceiling or wall using the included bracket. Connect the Ethernet cable and use a PoE switch or power adapter. Adjust the angle and focus for the desired view.
Does the camera support Wi-Fi?
No, the KCM-3311 supports wired Ethernet only. For wireless connectivity, you need to connect a separate Wi-Fi bridge to the network.
What video compression formats does the camera support?
The camera supports H.265, H.264, and MJPEG compression. H.265 offers high efficiency and reduced bandwidth usage.
How can I access the camera from outside my local network?
Set up port forwarding on your router for RTSP port 554 and HTTP port 80. Alternatively, use ACTi's NVR or cloud service for easier remote access without port forwarding.
Does the camera support motion detection?
Yes, it supports motion detection with customizable zones and sensitivity. You can configure alerts to be sent via email or FTP.
How do I update the firmware?
Download the latest firmware from ACTi's website. Log into the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file.
Is the camera compatible with third-party software?
Yes, it supports ONVIF Profile S, RTSP, and standard network protocols for integration with NVRs and VMS platforms.
What are the storage options for local recording?
The camera has a microSD card slot for local recording. It also supports network storage such as NAS or FTP destinations.
User questions about KCM-3311 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual KCM-3311 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KCM-3311 by ACTi.
USER MANUAL KCM-3311 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : KCM-3311
Category : Security Camera