D65A - Security Camera ACTi - Free user manual and instructions
Find the device manual for free D65A ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Security Camera |
| Marque | ACTi |
| Modèle | D65A |
| Catégorie | Network Dome Camera |
| Capteur | 1/2.8" CMOS |
| Résolution maximale | 5 Megapixels (2592 x 1944) |
| Lentille | Focale fixe 2.8 mm, champ de vision ~90° |
| Visibilité nocturne | IR intégré jusqu’à 30 m |
| Alimentation | PoE IEEE 802.3af, 12 V DC |
| Consommation | Max. 6 W |
| Dimensions | Ø 129 mm × 108 mm |
| Poids | 0.85 kg |
| Indice de protection | IP66 (anti-poussière et jet d’eau) |
| Température de fonctionnement | -20 °C à 50 °C |
| Stockage | Compatible microSD/SDHC jusqu’à 256 Go |
| Fonctions principales | Détection de mouvement, zone de confidentialité, WDR, réduction de bruit 3D |
| Réseau | Ethernet 10/100, ONVIF Profile S |
| Entretien et nettoyage | Essuyer le dôme avec un chiffon doux et sec, ne pas utiliser de produits abrasifs |
| Sécurité | Authentification par mot de passe, chiffrement TLS, démarrage sécurisé |
| Pièces détachées et réparabilité | Lentille et joint d’étanchéité remplaçables par un technicien certifié |
| Informations générales | Manuel utilisateur disponible en PDF sur notice-facile.com |
Frequently Asked Questions - D65A ACTi
What is the default IP address of the ACTi D65A camera?
The default IP address is 192.168.0.100. Set your computer’s IP to the same subnet (e.g., 192.168.0.50) to access the web interface.
How do I perform a factory reset on the D65A?
Press and hold the reset button located near the network port for 10 seconds while the camera is powered. The camera will reboot with factory defaults.
Can the D65A be used outdoors?
Yes, the D65A has an IP66 rating, making it dust-tight and protected against powerful water jets. It is suitable for outdoor installations.
What is the maximum microSD card size supported?
The camera supports microSD/SDHC cards up to 256 GB. It is recommended to use a high-endurance card for continuous recording.
How do I set up motion detection?
In the web interface, go to Event > Motion Detection. Enable the feature, adjust the sensitivity, and define one or more detection zones. You can set triggers for recording or alerts.
Is the D65A ONVIF compatible?
Yes, the D65A supports ONVIF Profile S, allowing integration with third-party VMS software and NVRs that support the standard.
What power options are available?
The camera supports Power over Ethernet (PoE IEEE 802.3af) and 12 V DC input. When using PoE, both data and power are delivered via a single Ethernet cable.
How can I clean the dome of the D65A?
Use a soft dry cloth to gently wipe the dome. For stubborn dirt, slightly dampen the cloth with water. Avoid alcohol or harsh chemicals that can damage the lens coating.
Can the D65A record without an NVR?
Yes, it supports local recording via microSD card and can send snapshots or video to an FTP server or cloud service. It also features an onboard web server for direct viewing.
What is the best way to protect the camera from hacking?
Change the default password immediately, keep firmware updated, disable unused ports, and use encrypted VLANs or VPNs. It also supports TLS encryption for communication.
User questions about D65A ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual D65A - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D65A by ACTi.
USER MANUAL D65A ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : D65A
Category : Security Camera