A950 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free A950 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | ACTi |
| Model | A950 |
| Sensor | 5MP CMOS (1/2.7") |
| Resolution | 5 Megapixel (2560 x 1920) |
| Lens | Fixed focal 3.6mm |
| Night Vision | Infrared up to 30m |
| Power Supply | DC 12V or PoE (802.3af) |
| Dimensions (W x H x D) | 78 x 70 x 155 mm |
| Weight | 500 g |
| Mounting | Wall or ceiling mount |
| Ingress Protection | IP66 weatherproof |
| Storage | MicroSD card slot |
| Connectivity | Ethernet 10/100 Mbps |
| Video Compression | H.265, H.264 |
| Motion Detection | Yes |
| Audio | Two-way audio support |
| Operating Temperature | -30°C to 50°C |
| Maintenance | Clean housing and lens regularly with a soft, dry cloth. |
| Safety | Use only supplied power adapter or certified PoE switch. |
| Spare Parts | No user-serviceable parts; contact certified technicians. |
| General Info | Watchdog timer to recover from abnormal conditions. |
Frequently Asked Questions - A950 ACTi
How do I reset the ACTi A950 to factory settings?
Locate the reset button on the camera housing. Press and hold it for 10 seconds while the camera is powered on. The camera will reboot with default settings. Use the quick setup wizard after reset.
Can I use this camera outdoors?
Yes, the ACTi A950 is rated IP66 weatherproof, making it suitable for outdoor installation. It can operate in temperatures from -30°C to 50°C.
What power sources does the A950 support?
The camera supports DC 12V input and Power over Ethernet (802.3af). For ease of installation, use a PoE switch or injector to provide both power and data over a single cable.
How do I access the camera remotely?
Set up port forwarding on your router or use a static IP for the camera. Then connect via the ACTi Web Viewer or mobile app using the configured external IP and port. Always change the default password for security.
How do I configure motion detection?
Log into the camera's web interface, go to Event > Motion Detection. Enable the feature, draw detection zones, and set sensitivity and trigger actions such as email alerts or recording.
How do I update the firmware?
Download the latest firmware from the ACTi website. In the camera web interface, go to Maintenance > Firmware Upgrade, choose the file, and upload. Do not disconnect power during the update.
Can I save recordings locally?
Yes, the A950 supports a microSD card (up to 256GB) for edge storage. Insert the card in the slot and format it through the interface. You can also set up continuous or scheduled recording.
How do I clean the camera lens?
Use a dry, soft cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water or an optical cleaner. Do not use abrasive materials or solvents.
What should I do if the camera does not power on?
Check that the 12V power adapter or PoE cable is properly connected and powered. Verify the Ethernet cable is securely plugged in. If using PoE, test with a different network cable or port. If the issue persists, contact a certified technician.
Is the camera compatible with third-party software?
Yes, the ACTi A950 supports ONVIF and RTSP protocols, allowing integration with major VMS systems and NVRs from other brands.
User questions about A950 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual A950 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A950 by ACTi.
USER MANUAL A950 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : A950
Category : Security Camera