B22 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free B22 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera (Box Type) |
| Brand | ACTi |
| Model | B22 |
| Image Sensor | 1/3" Progressive CMOS |
| Maximum Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | 30 fps at 1080p |
| Lens | 3.6mm Fixed Lens |
| Night Vision | Built-in IR LEDs, up to 20m |
| Video Compression | H.264, MJPEG |
| Power Supply | PoE 802.3af or DC 12V |
| Power Consumption | Max 6W |
| Dimensions (W x D x H) | 65 x 120 x 60 mm |
| Weight | 250g |
| Connectivity | 10/100 Ethernet (RJ-45) |
| Storage | MicroSD/SDHC card slot (up to 64GB) |
| Operating Temperature | -10°C to 50°C |
| Mounting | Wall/ceiling mount bracket included |
| Protection Rating | Designed for indoor use |
| Reset Mechanism | Reset button on rear panel |
| Included Accessories | Mounting kit, CD with software, quick guide |
| Maintenance | Clean lens with soft dry cloth; avoid water and solvents |
| Safety | Use only certified power supplies and proper grounding |
| Spare Parts and Repairability | Contact ACTi support for replacement parts and service |
Frequently Asked Questions - B22 ACTi
How do I perform a factory reset on the ACTi B22 camera?
Press and hold the reset button located on the rear panel for 5 seconds using a pin. The camera will reboot and restore the default factory settings, including IP address and login credentials.
What is the default IP address and login for the B22?
The default IP address is 192.168.0.100 with the username admin and password 123456. It is strongly recommended to change the password upon first login.
Can the B22 camera be used outdoors?
The B22 is designed for indoor use. If installed outdoors, it must be placed under a protective housing to avoid exposure to rain, moisture, or extreme temperatures.
How can I access the live video feed from my B22 camera remotely?
Use the ACTi web viewer or the free ACTi Mobile Application. Ensure your camera is connected to the network, configure port forwarding on your router, or set up an ACTi NVR for easier remote access.
Does the ACTi B22 support two-way audio?
The B22 is primarily a video surveillance camera; it does not have a built-in speaker or microphone, so two-way audio is not supported. To add audio, consider connecting an external microphone or speaker to the audio input/output if available (check your model).
What microSD card is recommended for the B22?
A Class 10 high-speed MicroSD/SDHC card up to 64GB is recommended. For continuous recording, choose a card with sufficient capacity and endurance.
How do I upgrade the firmware of the B22?
Download the latest firmware from the ACTi official website, log in to the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not disconnect power during the upgrade process.
How far can the camera see at night?
With built-in IR LEDs, the B22 can capture clear black-and-white images up to 20 meters (65 feet) in complete darkness.
Can I power the B22 using Power over Ethernet (PoE)?
Yes, the B22 supports IEEE 802.3af PoE. Simply connect it to a PoE switch or injector, eliminating the need for a separate power cable.
What maintenance is required for the B22 camera?
Periodically clean the lens with a soft, dry microfiber cloth to remove dust. Do not use harsh chemicals or get the device wet. Ensure the camera is properly secured and cables are not bent.
User questions about B22 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual B22 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B22 by ACTi.