917.371522 - Drill Craftsman - Free user manual and instructions
Find the device manual for free 917.371522 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Craftsman |
| Model Number | 917.371522 |
| Power Source | Corded Electric |
| Input Voltage | 120V AC |
| Chuck Size | 3/8 inch |
| Chuck Type | Keyed |
| Variable Speed Trigger | Yes |
| Reversible Motor | Yes |
| No-Load Speed | 0-2500 RPM |
| Horsepower | 0.5 HP |
| Motor Bearings | Ball bearing |
| Cord Length | 6 feet |
| Weight | 4.2 pounds |
| Dimensions (L x W x H) | 10.0 x 3.5 x 8.0 inches |
| Handle Design | Soft-grip handle |
| Included Accessories | Carrying case, chuck key |
| Recommended Applications | Wood, metal, plastic |
| Maintenance | Clean vents, wipe exterior |
| Safety Features | Double-insulated construction |
| Repairability | Replacement brushes available |
| Warranty | 1-year limited |
Frequently Asked Questions - 917.371522 Craftsman
How do I change the direction of rotation?
Use the reversing lever located above the trigger. Slide it to the left for forward drilling and to the right for reverse operation, such as removing screws.
How do I install or remove a drill bit?
Use the included chuck key to loosen the chuck jaws. Insert the bit and tighten firmly, ensuring the bit is centered before final tightening.
Can I use this drill for masonry or concrete?
This drill is designed for wood, metal, and plastic. For concrete, use a hammer drill with carbide bits to prevent damage to the tool.
What kind of maintenance does the drill require?
Keep air vents unblocked and clean. Wipe the housing with a damp cloth and dry thoroughly. Periodically check brush wear and replace them when needed.
Why is the drill not starting?
Check the power cord, outlet, and the trigger switch. Ensure the reversing lever is not in the middle position. If it still does not start, the brushes may need replacement.
What is the maximum speed of this drill?
The drill features a variable speed trigger with a no-load speed up to 2500 RPM, allowing fast drilling with controlled acceleration.
Can I use the drill for screwdriving?
Yes, set the speed low and use the variable speed trigger to control torque. Use appropriate screwdriver bits for best results.
How do I clean the drill?
Unplug the drill and wipe the exterior with a clean, dry cloth. Do not use water or solvents. Clean chuck jaws with a brush to remove debris.
Does the drill have a keyless chuck?
No, it features a keyed chuck for secure bit retention, which requires the chuck key to tighten and loosen bits.
What should I do if the drill sparks?
Some sparks are normal from the motor brushes. Excessive sparks indicate worn brushes or a motor issue; replace brushes or consult a qualified technician.
User questions about 917.371522 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 917.371522 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 917.371522 by Craftsman.
USER MANUAL 917.371522 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 917.371522
Category : Drill