917.371523 - Drill Craftsman - Free user manual and instructions
Find the device manual for free 917.371523 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Drill |
| Brand | Craftsman |
| Model | 917.371523 |
| Power Source | 120V AC, 60Hz |
| Amperage | 6 Amps |
| No-Load Speed | 0-3000 RPM (Variable Speed) |
| Chuck Type | Keyed, 3/8 inch |
| Reversible | Yes |
| Trigger Lock | Yes |
| Weight | Approx. 4.2 lbs (1.9 kg) |
| Power Cord Length | 6 ft (1.8 m) |
| Keyless or Keyed Chuck | Keyed Chuck |
| Drilling Capacity (Wood) | 1/2 inch |
| Drilling Capacity (Metal) | 3/8 inch |
| Maintenance | Keep ventilation slots clean; lubricate chuck spindle periodically |
| Safety Features | Double insulated; lock-on button; trigger safety |
| Spare Parts Availability | Replacement brushes, chuck key, carbon brushes available |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - 917.371523 Craftsman
What type of chuck does the Craftsman 917.371523 drill use?
It uses a keyed chuck (3/8 inch) that requires the included chuck key to tighten or loosen.
Is the drill reversible?
Yes, the drill has a forward/reverse switch for driving and removing screws or backing out of holes.
What is the maximum drilling capacity in wood?
The maximum drilling capacity in wood is 1/2 inch (12.7 mm) when using a twist bit.
How do I change the speed?
The speed is variable by squeezing the trigger; the harder you squeeze, the faster the drill spins.
What power cord length is provided?
The power cord is approximately 6 feet (1.8 meters) long.
How do I replace the carbon brushes?
Unscrew the brush caps on the motor housing, remove old brushes, and insert new ones of the same type. Ensure the brushes are seated properly.
Can I use the drill for driving screws?
Yes, with a screwdriver bit in the chuck, you can drive screws. Use the variable speed trigger for control.
What safety features does this drill have?
The drill is double insulated (no ground wire required), has a lock-on button for continuous operation, and a trigger lock-off to prevent accidental starts.
How do I clean the drill?
Wipe the exterior with a dry cloth. Periodically blow out dust from ventilation slots using compressed air.
Where can I find replacement parts?
Replacement parts such as brushes, chuck key, and trigger assembly are available from Craftsman service centers or online retailers.
User questions about 917.371523 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual 917.371523 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 917.371523 by Craftsman.
USER MANUAL 917.371523 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 917.371523
Category : Drill