DFM-63- -B - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DFM-63- -B Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic linear drive |
| Brand | Festo |
| Model | DFM-63- -B |
| Series | DFM |
| Bore Size | 63 mm |
| Actuation | Double-acting |
| Stroke Length | Variable, configurable to application |
| Operating Pressure | 2 to 10 bar |
| Operating Medium | Filtered compressed air, lubricated if required |
| Ambient Temperature | -10 °C to +60 °C |
| Cushioning | Adjustable pneumatic cushioning at end positions |
| Position Sensing | Ready for proximity switches (sensor slots) |
| Mounting | Via accessories (foot, flange, trunnion) |
| Dimensions | Depend on stroke length; base length from approx. 150 mm |
| Weight | Approx. 0.5 kg for basic version |
| Main Functions | Linear movement for automation tasks, pick-and-place, pushing/pulling |
| Maintenance | Low maintenance; check seals and rod for wear |
| Cleaning | Wipe with damp cloth; avoid aggressive solvents |
| Safety Precautions | Isolate air supply before servicing; ensure proper installation |
| Spare Parts | Seals, piston rod, end caps available as spare parts |
| Repair | Repairable by qualified personnel; use genuine Festo parts |
Frequently Asked Questions - DFM-63- -B Festo
What is the Festo DFM-63- -B used for?
The Festo DFM-63- -B is a pneumatic linear drive used for reliable linear motion in automation systems, such as picking and placing, clamping, and pushing applications.
What is the bore size?
The bore size is 63 mm, which determines the theoretical force output at a given operating pressure.
What is the operating pressure range?
The typical operating pressure range is 2 to 10 bar (29 to 145 psi). Always check the specific configuration for maximum allowable pressure.
What type of movement does it have?
It is a double-acting cylinder, meaning air pressure moves the piston in both directions (extension and retraction).
How do I identify the position of the piston?
The cylinder is designed to accept proximity sensors (such as Festo SME/SMT) in its sensor grooves, allowing non-contact detection of piston position.
How do I adjust the cushioning?
The end-position cushioning is adjustable via screws located at the cylinder end caps. Turn clockwise to increase damping, counterclockwise to reduce it.
What type of compressed air should be used?
Use filtered, unlubricated compressed air (or optionally lubricated). Ensure air quality conforms to ISO 8573-1:2010 class 7 for particles and class 4 for water.
How do I maintain the DFM-63- -B?
Maintenance is minimal. Periodically check for leaks, damage to the rod, and wear on seals. Replace worn seals with genuine Festo spare parts.
What safety precautions should I follow?
Always disconnect the air supply and ensure the system is depressurized before servicing. Install properly with correct alignment to prevent side loads.
Can I repair the cylinder myself?
Basic repair such as replacing seals can be done by qualified technicians using genuine Festo repair kits. For complex issues, contact Festo service.
User questions about DFM-63- -B Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DFM-63- -B - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFM-63- -B by Festo.
USER MANUAL DFM-63- -B Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DFM-63- -B
Category : Uncategorized