DADM-CK-90-12 - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DADM-CK-90-12 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Festo |
| Model | DADM-CK-90-12 |
| Product Type | Pneumatic cylinder (linear actuator) |
| Bore Size | 90 mm |
| Stroke Length | 12 mm |
| Operating Pressure | 1.5 to 10 bar |
| Operating Temperature | -20 to +80 °C |
| Working Medium | Compressed air per ISO 8573-1 |
| Cushioning | Adjustable pneumatic cushioning at both ends |
| Piston Rod Thread | M20 x 1.5 |
| Mounting Type | Multiple options available (foot, flange, trunnion) |
| Port Size | G1/4 |
| Material | Aluminum barrel, steel rod, anodized surfaces |
| Seals | Polyurethane (PUR) |
| Position Sensing | Optional proximity sensor slots |
| Weight | Approx. 2.5 kg |
| Operating Style | Double-acting |
| Corrosion Protection | Nickel-plated end caps (optional stainless steel) |
| Standards | Meets ISO 15552 dimensional standards (approximation) |
| Maintenance | Replace seals and rod as required; available from Festo |
Frequently Asked Questions - DADM-CK-90-12 Festo
What is the stroke length of the DADM-CK-90-12?
The stroke length is 12 mm (0.47 inches), which allows for short linear movements in automated systems.
What operating pressure is recommended for this cylinder?
The recommended operating pressure is between 1.5 and 10 bar. Ensure the compressed air is filtered and regulated according to ISO 8573-1.
How do I mount the DADM-CK-90-12 cylinder?
You can mount the cylinder using optional accessories such as foot mounts, flanges, or trunnions. Align the cylinder axis properly to avoid side loads.
How to adjust the cushioning on the cylinder?
The cylinder has adjustable cushioning screws at both end caps. Turn the screws clockwise for harder cushioning and counterclockwise for softer cushioning.
What is the operating temperature range?
It operates in a temperature range from -20°C to +80°C. For lower temperatures down to -40°C, special seals are required.
How do I connect pneumatic tubing to this cylinder?
Use fittings compatible with the G1/4 port size. Apply PTFE tape or sealant on the threads to ensure an airtight connection.
Can the cylinder run without lubrication?
Yes, it can operate with non-lubricated air. The seals are suitable for dry air, but installing a filter and regulator is recommended to prolong service life.
How to prevent damage to the piston rod?
Ensure there is no lateral or side load on the rod. Use guided mounts and check alignment. Adjust the cushioning to reduce impact at stroke ends.
Are spare parts available for this model?
Yes, replacement parts such as seal kits, piston rods, and guide rings are available. Contact Festo or their distributors for exact part numbers.
What is the bore size of the DADM-CK-90-12?
The bore size is 90 mm, which determines the force output. With a 90 mm bore and 6 bar pressure, the theoretical force is approximately 3.8 kN.
User questions about DADM-CK-90-12 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DADM-CK-90-12 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DADM-CK-90-12 by Festo.
USER MANUAL DADM-CK-90-12 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DADM-CK-90-12
Category : Uncategorized