M-Clock Lite DMS-4 - Audio Equipment DRAWMER - Free user manual and instructions
Find the device manual for free M-Clock Lite DMS-4 DRAWMER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Drawmer |
| Model | M-Clock Lite DMS-4 |
| Product Type | Digital Master Clock and Distribution Amplifier |
| Category | Audio Equipment |
| Clock Outputs | 4 x BNC word clock outputs |
| Reference Input | 1 x BNC word clock input |
| Supported Sample Rates | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Jitter Performance | Ultra-low jitter (< 1 ps) |
| Clock Accuracy | Tight tolerance (< ±1 ppm) |
| Display | LED status and mode indicators |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Dimensions | 19 inch rack unit (483 x 44 x 150 mm) |
| Weight | 1.8 kg |
| Chassis | Steel chassis with black finish |
| Rackmountable | Yes, 1U standard rack mount |
| Output Termination | 75 ohm standard word clock termination |
| Operating Temperature | 0 to 40 degrees Celsius |
| Included Accessories | Power cord, user manual |
| Maintenance | Clean with dry soft cloth; do not use solvents |
| Safety | Do not expose to moisture; disconnect power before cleaning |
| Repair and Spares | Refer to qualified service personnel; no user-serviceable parts inside |
Frequently Asked Questions - M-Clock Lite DMS-4 DRAWMER
What is the Drawmer M-Clock Lite DMS-4 used for?
The M-Clock Lite DMS-4 is a digital master clock designed to synchronize digital audio devices such as converters, interfaces, and mixers. It provides an ultra-stable word clock signal to ensure low jitter and accurate timing across your studio.
How do I connect the word clock outputs?
Use standard BNC cables to connect the word clock output BNC connectors on the rear panel to the word clock inputs on your destination devices. Ensure all connections are terminated properly, typically at 75 ohms.
Can the DMS-4 sync to an external clock source?
Yes, the DMS-4 has a dedicated reference input (BNC) that accepts an external word clock signal. You can select this source to lock the device to an already synchronized system.
What sample rates are supported?
The unit supports standard audio rates including 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz. Higher rates enable high-resolution audio with minimal timing artifacts.
Is the M-Clock Lite DMS-4 compatible with any digital audio interface?
It is compatible with any device that accepts a standard word clock input. Most professional audio interfaces, AD/DA converters, and digital mixers can be synced to this master clock.
How do I set the clock source on the DMS-4?
Use the front panel selector to choose between internal or external reference. The LED indicators show which mode is active. Internal mode uses the unit's precision oscillator; external mode locks to the incoming word clock.
Is the DMS-4 rackmountable?
Yes, it is designed to fit a standard 19-inch rack and occupies one rack unit (1U). This makes it easy to integrate into a professional studio setup.
What is the jitter performance of the M-Clock Lite DMS-4?
The device delivers ultra-low jitter of less than 1 picosecond, ensuring audio clarity and reducing digital distortion. This is crucial for high-end recording and mixing environments.
How should I maintain and clean the unit?
Disconnect the power and wipe the surface with a dry soft cloth. Avoid using cleaning agents, solvents, or water, as they may damage the finish. Regular dusting prevents heat buildup and preserves reliability.
Are spare parts and repair services available for the DMS-4?
The M-Clock Lite DMS-4 has no user-serviceable parts. For repairs or spare parts, contact an authorized Drawmer service center. Opening the unit by yourself may void the warranty.
User questions about M-Clock Lite DMS-4 DRAWMER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Equipment in PDF format for free! Find your manual M-Clock Lite DMS-4 - DRAWMER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-Clock Lite DMS-4 by DRAWMER.
USER MANUAL M-Clock Lite DMS-4 DRAWMER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DRAWMER
Model : M-Clock Lite DMS-4
Category : Audio Equipment