WR36DC - Screwdriver HiKOKI - Free user manual and instructions
Find the device manual for free WR36DC HiKOKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Brand | HiKOKI |
| Model | WR36DC |
| Power Source | 36V Li-ion battery |
| Battery Compatibility | HiKOKI 36V slide-type batteries |
| Max Torque | 90 Nm |
| No-Load Speed | 0-2,000 rpm |
| Chuck Capacity | 13 mm keyless chuck |
| Variable Speed Trigger | Yes |
| Forward/Reverse | Yes |
| LED Work Light | Yes |
| Built-in Safety Brake | Yes |
| Ergonomic Grip | Rubberized handle |
| Weight | 2.0 kg with battery |
| Dimensions (LxWxH) | 220 x 70 x 220 mm |
| Overload Protection | Electronic motor protection |
| Recommended Use | Driving screws, drilling, fastening |
| Maintenance | Clean air vents and chuck regularly |
| Safety Certifications | CE, RoHS |
| Spare Parts | Available through authorized service centers |
| Repairability | Modular design for easy repair |
Frequently Asked Questions - WR36DC HiKOKI
How do I install or remove the battery?
To install the battery, align the slide rails on the battery with the slot on the tool and push forward until it clicks into place. To remove, press the release button and slide the battery out. Always ensure the tool is switched off before doing so.
What is the correct way to change accessories?
Use the keyless chuck to change accessories. Open the chuck by rotating the sleeve counterclockwise, insert the accessory, then tighten by rotating clockwise. Make sure the accessory is securely locked before starting work.
How do I control the speed and torque?
The variable speed trigger allows you to adjust the rotational speed by applying more or less pressure. For torque control, select the appropriate speed range using the electronic switch. The motor will stop if the load exceeds the designed limit.
Can I use 18V batteries with this tool?
No, the WR36DC is designed for 36V Li-ion batteries only. Using an incompatible battery can cause damage and will void the warranty.
How should I clean and maintain my screwdriver?
Keep the tool clean and dry. Wipe the exterior with a dry cloth, and use a soft brush to remove dust from the air vents. Periodically lubricate the chuck and check the condition of the screwdriver for wear.
What safety precautions should I take?
Wear safety goggles and insulated gloves, and ensure the work area is well-lit. Do not use the tool in wet or explosive environments. Disconnect the battery before changing accessories or performing maintenance.
How do I know when the battery needs recharging?
When the tool slows down or stops, it is time to recharge the battery. Most HiKOKI batteries have a charge level indicator. Always use the specified charger to recharge.
Can I use the screwdriver outdoors in rain?
No, the tool is not water-resistant. Avoid exposing it to moisture or rain to prevent electric shock and internal damage. Store it in a dry location.
What should I do if the motor stops unexpectedly?
Check the battery charge and ensure it is properly inserted. If the electronic overload protection was activated, release the trigger and let the tool cool for a few minutes. If the problem persists, contact a HiKOKI service center.
What is the warranty period?
HiKOKI typically offers a 12-month warranty, but this may vary by region. Keep your receipt and register your product online. Spare parts are available through authorized dealers.
User questions about WR36DC HiKOKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual WR36DC - HiKOKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WR36DC by HiKOKI.
USER MANUAL WR36DC HiKOKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HiKOKI
Model : WR36DC
Category : Screwdriver