AX4U4133716G19J-SW50 - Memory Card XPG - Free user manual and instructions
Find the device manual for free AX4U4133716G19J-SW50 XPG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Memory Module (RAM) |
| Brand | XPG (ADATA) |
| Model | AX4U4133716G19J-SW50 |
| Memory Type | DDR4 |
| Capacity | 16 GB |
| Speed | 4133 MT/s (PC4-3300) |
| CAS Latency | CL19 |
| Voltage | 1.35V |
| Form Factor | DIMM 288-pin |
| Compatibility | Desktop motherboards with DDR4 slots |
| Cooling | Aluminum heatsink |
| Supports Intel XMP 2.0 | Yes |
| Dual Channel Kit | Single module (16GB), can be used in pairs |
| Dimensions | 133.35 x 34.2 x 7.2 mm |
| Weight | 48 g (approx.) |
| Installation | Plug and play, no drivers required |
| Maintenance | Wipe with a soft, dry cloth |
| Safety | Unplug PC before handling; use anti-static precautions |
| Repairability | Not user-repairable; sealed module |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - AX4U4133716G19J-SW50 XPG
What type of memory is the XPG AX4U4133716G19J-SW50?
It is a DDR4 memory module designed for desktop computers, with a capacity of 16 GB and a speed of 4133 MT/s.
Is this module compatible with my motherboard?
It is compatible with motherboards that support DDR4 memory and have 288-pin DIMM slots. Check your motherboard's QVL for certified memory modules.
How do I install this RAM?
Turn off your computer, open the case, align the notch on the module with the slot, and press down firmly until the clips click. See the manual for details.
Do I need to enable XMP in BIOS to reach 4133 MHz?
Yes, the module defaults to a lower speed. Enable Intel XMP 2.0 in your BIOS to run at the rated 4133 MHz with the correct timings.
What voltage is required for this module?
The recommended operating voltage is 1.35V for standard use. When enabling XMP, the motherboard will automatically set the correct voltage.
Can I use two of these modules in dual channel?
Yes, installing two identical modules in the correct slots (usually slots 2 and 4) will enable dual-channel mode for increased bandwidth.
Does this RAM come with a heatsink?
Yes, it features an aluminum heatsink to dissipate heat efficiently during overclocking.
How should I clean the memory module?
Use a soft, dry cloth to wipe the surface. Do not use water or cleaning solvents.
What should I do if my computer doesn't boot after installation?
Ensure the module is fully seated and the locking clips are closed. Reset the BIOS by clearing CMOS, and try again with a single module if needed.
Is this memory compatible with AMD Ryzen processors?
Yes, it is compatible with AMD Ryzen processors and most DDR4 motherboards. Check your motherboard's support for high-speed memory.
User questions about AX4U4133716G19J-SW50 XPG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Memory Card in PDF format for free! Find your manual AX4U4133716G19J-SW50 - XPG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX4U4133716G19J-SW50 by XPG.
USER MANUAL AX4U4133716G19J-SW50 XPG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : XPG
Model : AX4U4133716G19J-SW50
Category : Memory Card