AT8657/LED-S - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free AT8657/LED-S Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser gooseneck microphone with LED ring |
| Brand | Audio-Technica |
| Model | AT8657/LED-S |
| Polar Pattern | Cardioid |
| Frequency Response | 70 Hz – 20 kHz |
| Sensitivity | -37 dB (0 dB = 1V/Pa) |
| Output Impedance | 100 Ω |
| Power Requirements | 48V DC Phantom Power |
| LED Indicator | Blue LED ring, powered via phantom power |
| Connector | 3-pin XLRM |
| Gooseneck Length | 304.8 mm (12") |
| Mounting | Flange mount included |
| Dimensions | Gooseneck 304.8 mm x 9.4 mm; Head 47.6 mm x 9.4 mm |
| Weight | 240 g (8.5 oz) |
| Finish | Matte black |
| Operating Temperature | -10°C to 60°C |
| Maintenance | Clean with soft, dry cloth; avoid solvents |
| Safety | Do not disassemble or expose to moisture |
| Spare Parts | Replacement gooseneck and windscreen available |
| Repairability | For servicing, contact authorized Audio-Technica service center |
| Compliance | RoHS compliant |
| Package Contents | Microphone, mount flange, operating manual |
Frequently Asked Questions - AT8657/LED-S Audio-Technica
How do I connect the AT8657/LED-S microphone?
Connect the microphone's 3-pin XLRM output to a mixer or preamp with a standard XLR cable. Ensure that 48V phantom power is enabled on the input channel to power the microphone and its LED ring.
Does the AT8657/LED-S require a battery?
No, the microphone is powered entirely by 48V DC phantom power supplied from a mixer or audio interface. No battery is needed.
What is the LED ring for?
The blue LED ring around the microphone head serves as a visual indicator that the microphone is active and receiving phantom power, making it ideal for presentations and broadcast settings.
What is the recommended distance between the speaker and microphone?
For optimal sound capture, place the microphone 5 to 15 cm (2 to 6 inches) from the speaker. Adjust the gooseneck to aim the microphone capsule toward the sound source.
Can the gooseneck be bent into any shape?
Yes, the gooseneck is flexible and can be shaped to hold the microphone in the desired position. Avoid sharp bends to prevent damage.
How do I reduce background noise?
Use the cardioid polar pattern to reject sound from the rear and sides. Position the microphone close to the speaker and place it away from noisy sources like projectors or air conditioning vents.
What should I do if the microphone is not producing sound?
Check that the XLR cable is securely connected and that 48V phantom power is switched on. Verify the mixer input channel is not muted and the gain is turned up.
How should I clean the microphone?
Clean the microphone with a soft, dry cloth. Do not use water, solvents, or cleaning sprays, as they may damage the internal components or the LED ring.
Is the AT8657/LED-S compatible with all mixing consoles?
The microphone works with any console that provides 48V phantom power and has standard XLR inputs. Older consoles without phantom power will not activate the LED or the condenser capsule.
Can I use this microphone outdoors?
The microphone is intended for indoor use. Exposing it to rain, high humidity, or extreme temperatures can cause damage. If used outdoors, provide protection from moisture.
User questions about AT8657/LED-S Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual AT8657/LED-S - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT8657/LED-S by Audio-Technica.
USER MANUAL AT8657/LED-S Audio-Technica
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audio-Technica
Model : AT8657/LED-S
Category : Microphone