AT882TH/SS - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free AT882TH/SS Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Boundary microphone |
| Brand | Audio-Technica |
| Model | AT882TH/SS |
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 20-20,000 Hz |
| Open Circuit Sensitivity | -34 dB (19.9 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 130 dB SPL |
| Signal-to-Noise Ratio | 68 dB |
| Output Impedance | 200 ohms |
| Dynamic Range | 106 dB |
| Power Requirement | 11-52V DC phantom power |
| Cable | 25 ft (7.6 m) attached XLRM type |
| Dimensions | 94.5 x 17.8 x 22.6 mm (3.72 x 0.70 x 0.89 in) |
| Weight | 90 g (3.2 oz) |
| Finish | Stainless steel |
| Mounting | Surface-mount on podium, table or wall |
| Application | Speech, conference and recording |
| Cleaning | Soft dry cloth; avoid liquids and solvents |
| Service | Refer to qualified service personnel |
Frequently Asked Questions - AT882TH/SS Audio-Technica
Does the AT882TH/SS require phantom power?
Yes, the AT882TH/SS is a condenser microphone and must be powered by 11-52V DC phantom power from a mixer or preamp.
What polar pattern does the AT882TH/SS have?
It features a cardioid polar pattern, which captures sound from the front while rejecting off-axis noise and minimizing feedback.
Can the AT882TH/SS be mounted on a podium?
Yes, its low-profile boundary-style enclosure is designed for surface mounting on podiums, tables, floors and walls.
What is the frequency response of this microphone?
The microphone responds from 20 Hz to 20 kHz, with a slightly rising response for clear speech intelligibility in conferences.
How should I clean the microphone?
Use a soft dry cloth to wipe the exterior. Never use water, solvents or abrasive cleaners, as they can damage the condenser element.
What cable is included with the AT882TH/SS?
It comes with a 25 ft (7.6 m) attached cable terminated with an XLRM connector for direct connection to a mixer.
Can I use the AT882TH/SS to record acoustic instruments?
Yes, it can be placed on a floor or table to capture acoustic instruments, speech, and room ambience with a cardioid pickup.
How do I prevent feedback during a live presentation?
Position the microphone close to the sound source, keep speakers and monitors out of the microphone's rear lobe, and use an EQ to cut problematic frequencies.
Is the AT882TH/SS battery powered?
No, it uses external phantom power only. There is no battery compartment, so connect it to a mixer or preamp that supplies 48V (or 11-52V) phantom power.
What is the maximum sound pressure level it can handle?
The maximum input SPL is 130 dB, making it suitable for loud speech or instruments without distortion.
User questions about AT882TH/SS Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual AT882TH/SS - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT882TH/SS by Audio-Technica.
USER MANUAL AT882TH/SS Audio-Technica
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audio-Technica
Model : AT882TH/SS
Category : Microphone