ES933/H - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free ES933/H Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cardioid Condenser Hanging Microphone |
| Brand | Audio-Technica |
| Model | ES933/H |
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 30 - 20,000 Hz |
| Low-Frequency Roll-Off | 80 Hz, 18 dB/octave |
| Open Circuit Sensitivity | -40 dB (10.0 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 139 dB SPL, 1 kHz at 1% T.H.D. |
| Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
| Output Impedance | 100 ohms |
| Phantom Power Requirements | 9-52V DC, 2 mA typical |
| Cable Length | 7.6 m (25 ft) |
| Output Connector | XLRM-type |
| Dimensions | 15.5 mm (0.61") diameter, 540.0 mm (21.26") long |
| Weight | 18 g (0.63 oz) |
| Operating Temperature Range | -10 C to 50 C (14 F to 122 F) |
| Cleaning | Wipe the microphone with a soft, dry cloth; do not use solvents or moisture. |
| Safety | Use only with specified phantom power supply; avoid rain or excessive moisture. |
| Spare Parts and Repairability | Windscreens and cables are available through authorized service centers; contact Audio-Technica support. |
| Accessories Included | Hanging clamp, windscreen, connecting cable |
Frequently Asked Questions - ES933/H Audio-Technica
Does the Audio-Technica ES933/H require phantom power?
Yes, the ES933/H is a condenser microphone and requires 9-52V phantom power. It typically draws 2 mA current.
What is the polar pattern of the ES933/H?
It features a cardioid polar pattern, which focuses on the sound source in front of the microphone while minimizing unwanted background noise.
Can the ES933/H be mounted on a stand?
The ES933/H is designed to be hung from a ceiling or frame. It can also be adapted to a boom stand with optional clips, but its primary mount is a hanging clamp included in the box.
What is the frequency response of this microphone?
The ES933/H has a frequency response of 30 Hz to 20 kHz, capturing a wide range of audio accurately for speech and music.
How do I replace the windscreen on the ES933/H?
The windscreen can be pulled off and replaced. Replacement windscreens are available as spare parts from Audio-Technica. Ensure the microphone is powered off before handling.
Is the cable replaceable?
The ES933/H comes with a permanently attached 7.6 m cable. If the cable is damaged, the microphone must be serviced by an authorized technician; it is not user-replaceable.
What accessories are included with the ES933/H?
The package includes the microphone, a hanging clamp, and a windscreen. Other accessories may vary by region.
Can I use the ES933/H with battery-powered mixers?
The microphone requires phantom power. Most professional mixers and interfaces provide 48V phantom power. If using a battery-powered unit, ensure it has a phantom power option.
What is the maximum sound pressure level the ES933/H can handle?
The microphone handles up to 139 dB SPL before distortion, making it suitable for loud sources when used with proper gain staging.
How should I clean and maintain the ES933/H?
Use a soft, dry cloth to wipe the body. Avoid moisture and cleaning solvents. Store it in a dry environment and use the supplied cap to protect the element when not in use.
User questions about ES933/H Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual ES933/H - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES933/H by Audio-Technica.
USER MANUAL ES933/H Audio-Technica
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audio-Technica
Model : ES933/H
Category : Microphone