BRIG-3 - Beer Tap Micro Matic - Free user manual and instructions
Find the device manual for free BRIG-3 Micro Matic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Beer tap faucet |
| Brand | Micro Matic |
| Model | BRIG-3 |
| Category | Beer dispensing tap |
| Material | Chrome-plated brass body |
| Handle material | Stainless steel |
| Connection to shank | 5/8\"-18 thread |
| Beer line connection | 1/4\" barb |
| Flow control | Adjustable flow control lever |
| Seal type | Forward-seal design |
| Operating pressure | 10-14 psi |
| Recommended serving temperature | 35-40°F (2-4°C) |
| Overall height | 3.5 inches (8.9 cm) |
| Overall width | 2.0 inches (5.1 cm) |
| Overall length | 4.5 inches (11.4 cm) |
| Net weight | 1.1 lbs (0.5 kg) |
| Cleaning method | Disassemble and hand wash with mild detergent |
| Food safety | NSF certified materials |
| Replacement parts | O-rings, springs, and gaskets available |
| Repairability | Full disassembly with standard tools |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - BRIG-3 Micro Matic
How do I clean the BRIG-3 beer tap?
Disassemble the tap by removing the handle and bonnet. Rinse all parts with warm water and a mild detergent. Avoid abrasive cleaners to protect the chrome finish. Allow parts to air dry before reassembling.
What is the recommended pressure for serving beer?
The ideal serving pressure is between 10 and 14 psi depending on the beer style and line length. Adjust the regulator to achieve a balanced pour with proper carbonation.
How do I install the BRIG-3 on my draft system?
Screw the tap onto a standard 5/8"-18 threaded shank and tighten with a wrench. Connect your beer line to the 1/4" barb and secure it with a hose clamp. Test for leaks before serving.
What replacement parts should I keep on hand?
Keep spare O-rings, springs, and gaskets for routine maintenance. These wear out over time and are available from Micro Matic distributors.
How can I stop a leak from the spout?
A leaking spout usually indicates a worn seal or O-ring. Disassemble the tap, inspect the rubber parts, and replace any damaged ones. Reassemble and tighten the bonnet securely.
Is the BRIG-3 compatible with nitro or stout beers?
Yes, the forward-seal design handles nitro and stout beers effectively. Use a nitrogen regulator and appropriate gas blend for best results.
What size shank does the BRIG-3 fit?
The BRIG-3 fits standard 5/8"-18 shanks commonly used in home and commercial draft systems. Check your existing tower shank thread compatibility.
How often should I lubricate the O-rings?
Lubricate the O-rings with food-grade lubricant every 1-2 months or whenever the tap feels stiff. Regular lubrication prevents sticking and extends seal life.
Can I use the BRIG-3 with a home kegerator?
Absolutely. The BRIG-3 is designed for standard draft systems and works well with home kegerators. Ensure your tower has the correct shank size and beer line connections.
Why does the tap stick or feel stiff?
Stiffness is often caused by dried beer residue or lack of lubrication. Disassemble, clean thoroughly, and apply a thin layer of food-grade lubricant to the moving parts.
User questions about BRIG-3 Micro Matic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer Tap in PDF format for free! Find your manual BRIG-3 - Micro Matic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRIG-3 by Micro Matic.
USER MANUAL BRIG-3 Micro Matic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Micro Matic
Model : BRIG-3
Category : Beer Tap