VP0716WNVQD - Vacuum Cleaner LG - Free user manual and instructions

Type of Product	Vacuum Cleaner
Brand	LG
Model	VP0716WNVQD
Product Category	Bagless Vacuum Cleaner
Power Supply	AC 220-240 V, 50/60 Hz
Power Consumption	1600 W approx.
Dust Collection	Bagless, transparent container
Dust Container Capacity	1.2 L
Filtration System	Cyclonic + washable HEPA exhaust filter
Suction Power	380 W approx. (Variable speed)
Noise Level	78 dB (A)
Weight	5.4 kg
Dimensions (W x D x H)	260 x 310 x 410 mm approx.
Cord Length	6 m
Hose Length	1.5 m
Telescopic Tube	Yes, with anti-static material
Included Nozzles	Floor brush, crevice tool, upholstery tool
Filter Maintenance	Washable; rinse and air dry
Spare Parts Availability	Filters and accessories available from LG service centers
Storage	Vertical parking position and floor standing

Frequently Asked Questions - VP0716WNVQD LG

How do I assemble the LG VP0716WNVQD vacuum cleaner?

Connect the hose to the main body, attach the telescopic tube, and clip the floor nozzle onto the tube. Make sure each section clicks into place before use.

What should I do when the dust container is full?

Press the release button to detach the container, empty it over a trash bin, and clean the cyclone unit if necessary. Reattach it securely.

How often should I clean the filters?

Clean the exhaust filter every 3 months or when you notice reduced suction. Rinse with water and let it dry completely before reinstalling.

Why is my vacuum cleaner losing suction?

Check for blockages in the hose, tube, or nozzle. Also empty the dust container and clean the filters to restore airflow.

Can I use this vacuum on carpets and hard floors?

Yes, the multi-surface floor brush features a height adjustment to suit both carpets and hard floors.

How does the cord winding work?

Simply press the cord rewind button located on the back of the unit to automatically retract the power cord. Hold the plug while rewinding.

What is the recommended maintenance schedule?

Empty the dust container after each use, wash the filter monthly, and check for blockages weekly. Replace the exhaust filter once a year or as needed.

Is there a warranty for this LG vacuum cleaner?

LG typically offers a 1-year warranty on vacuum cleaners. Keep your purchase receipt and contact an LG authorized service center for support.

How do I replace the power cord if it gets damaged?

The power cord should be replaced only by LG certified technicians to ensure safety. Never attempt to repair it yourself.

Can I store the vacuum cleaner upright?

Yes, the unit includes a vertical parking slot for easy storage. Slide the floor nozzle into the parking slot after use.

USER MANUAL VP0716WNVQD LG

Vacuum Cleaner OWNER'S MANUAL

MODEL: VP0716WNVQD

Please read carefully and thoroughly the operating instructions and safety precautions before installing and operating your vacuum cleaner.

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following ECDirectives :-73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "WARNING" or "CAUTION." These words mean:

WARNING

This symbol will alert you to hazards or unsafe practices which could cause serious bodily harm or death.

CAUTION

This symbol will alert you to hazards or unsafe practices which could cause bodily injury or property damage.

WARNING

• Disconnect electrical supply before servicing or cleaning the unit or when cleaner is not in use.
  Failure to do so could result in electrical shock or personal injury.
• Do not use vacuum cleaner to pick up anything that is burning or smoking such as cigarettes, or hot ashes.
  Doing so could result in death, fire or electrical shock.

- Do not vacuum flammable or explosive substances such as gasoline, benzene, thinners, propane (liquids or gases).

The fumes from these substances can create a fire hazard or explosion. Doing so could result in death or personal injury.

- Do not handle plug or vacuum cleaner with wet hands.

Doing so could result in death or electrical shock.

- Do not unplug by pulling on cord.

Doing so could result in product damage or electrical shock. To unplug, grasp the plug, not the cord.

- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

Failure to do so could result in electrical shock or personal injury.

- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

Failure to do so could result in electrical shock or personal injury or fire or product damage.

- Do not allow to be used as toy. Close attention is necessary when used by or near children.

Personal injury or product damage could result.

- Do not use the vacuum cleaner if the power cord or plug is damaged or faulty.

Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.

- Do not use vacuum cleaner if it has been under water.

Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.

WARNING

- Do not continue to vacuum if any parts appear missing or damaged.

Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard.

- Do not use an extension cord with this vacuum cleaner

Fire hazard or product damage could result.

• Using proper voltage.

Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed on the bottom of vacuum cleaner.

- Turn off all controls before unplugging.

Failure to do so could result in electrical shock or personal injury.

- Do not change the plug in any way.

Failure to do so could result in electrical shock or personal injury or product damage. Doing so result in death. If plug does not fit, contact a qualified electrician to install the proper outlet.

- Repairs to electrical appliances may only be performed by qualified service engineers.

Improper repairs may lead to serious hazards for the user.

- Do not plug in if control knob is not in OFF position.

Personal injury or product damage could result. (Depending on model)

- Keep children away and beware of obstructions when rewinding the cord to prevent personal injury.

The cord moves rapidly when rewinding.

(Depending on model)

- The hose contains electrical wires. Do not use it if it is damaged, cut or punctured.

Failure to do so could result in death, or electrical shock. (Depending on model)

CAUTION

• Do not put any objects into openings. Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow.

Failure to do so could result in product damage.

- Do not use vacuum cleaner without dust tank and/or filters in place.

Failure to do so could result in product damage.

- Do not use vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc.

They may damage the cleaner or dust bin.

- Store the vacuum cleaner indoors.

Put the vacuum cleaner away after use to prevent tripping over it.

- The vacuum cleaner is not intended to use by young children or infirm people without supervision.

Failure to do so could result in personal injury or productdamage.

- Only use parts produced or recommended by LG Electronics Service Agents.

Failure to do so could result in product damage.

- Use only as described in this manual. Use only with LG recommended or approved attachments and accessories.

Failure to do so could result in personal injury or product damage.

- To avoid personal injury and to prevent the machine from falling when cleaning stairs, always place it at the bottom of stairs.

Failure to do so could result in personal injury or product damage.

• Use accessory nozzles in sofa mode. Failure to do so could result in product damage.
• Make sure the filters (exhaust filter and motor safety filter) are completely dry before replacing in the machine.

Failure to do so could result in product damage.

• Do not dry the filter in an oven or microwave.
  Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
  Failure to do so could result in fire hazard.
• Do not dry near an open flame.
  Failure to do so could result in fire hazard.
  • Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders and fine dust.

These products clog the filters, reduce airflow and can cause damage to the cleaner.

Failure to clean the dust bin could cause permanent damage to the cleaner. (Depending on model)

- Don 't grasp the tank handle when you are moving the vacuum cleaner.

The vacuum cleaner's body may fall when separating tank and body. Personal injury or product damage could result. You should grasp the carrier handle when you aremoving the vacuum cleaner.

(Depending on model)

- If after emptying the dust tank the indicator light is on(red), clean the dust tank.

Failure to do so could result in product damage. (Depending on model)

CAUTION

Thermal protector :

This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.

2. CONTENTS AND SPECIFICATION

2.1. Carton Content

2.1.1 Carefully unpack the carton.

2.1.2 Locate the two side clasps which hold the top section in place.

2.1.3 Undo the clasps, remove the top section and take out the items in the tank.

2.1.4 Check and identify each component as listed below. If anything is missing or damaged please contact your supplier immediately.

2.2. Specifications

Motor 220V \~ 50Hz

Filter - Dry

Paper Bag and Re-usable filter

Filter - Wet Foam filter.

Item Description

1	Handle.
2	Exhaust outlet cover for HEPA filter.
3	HEPA filter.
4	Shut-off valve basket.
5	Floating cup valve.
6	Cable storage hook.
7	Accessory storage hole.
8	Extension tube holder.
9	Main switch.
10	Vacuum hose inlet.
11	Foot with castor.(x4)
12	Clasp. (x2)
13	Tank
14	Hose.
15	Dust bag.
16	Foam filter.
17	Reusable bag
18	Combo nozzle
19	Floor nozzle
20	Gulper tool
21	Crevice tool
22	Air regulator handle
23	Plastic tubes.(x3)

3. ASSEMBLY

3.1. Ensure the mains plug is disconnected.(fig.1)

3.2. Undo tank clasps.(fig.2)

3.3. Lift off the top section assembly.(fig.3)

3.4. Remove contents from inside the tank.(fig.4)

3.5 Turn the container upside down and insert the four feet with castors in the tank. Ensuring they are mouted correctly pushed all the way in. Screw on it tile tight.(fig.5a 5b)

3.6a. For dry vacuum cleaning fit the supplied reusable bag.(fig.6a)

3.6b. For dry suction fit the supplied dust bag. Inlet of the dust bug must go over the rib on the suction seat.(fig.6b)

3.6c. For wet suction fit the supplied foam filter.(fig.6c)

3.7. Re-assemble the top to the tank.(fig.7)

3.8. Fasten the 2 clasps.(fig.8)

3.9. Attach the suction hose to the suction inlet on the front of the

tank.

3.10. Fit the required accessory to the base of the extension tube or hose. Fit the air diffuser handle. Connect the suction hose.(fig.10)

4. DRY VACUUM CLEANING

WARNING! Ensure you read, understand and apply Section 1 'Safety Instructions'. Reminder: DO NOT vacuum hazardous substances. Use of an incorrect dust bag will invalidate your warranty.

4.1. Ensure the machine is unplugged

from the power supply.

4.2. Re-usable filter. Ensure it is clean and dry. Place the re-usable filter over the valve basket and adjust. Correct adjustment requires the ring to hold the re-usable filter snug against the ribs of the top section.

4.3. Be sure the re-usable filter completely covers the filter basket. Also check to ensure that all edges of the re-usable filter are secure under the mounting ring.

4.4. Dust Bag. Pull the dust bag flange over the inlet stub, taking care not to damage the bag.

4.5. Re-position the head onto the tank, and clip in place.

4.6. Insert the larger end of the flexible hose into the front inlet on the tank and lock in place. Push the required attachment onto the free end of the hose.

4.7. Plug in the power supply.

4.8 Switch the motor to vacuum only (position: ⏻ .)

4.9. When you have completed vacuuming, turn the switch to 'Off'. (position 'I'), and unplug from power supply. Regularly check the dust bag and dispose of safely when it is 2/3 full. The bag is manufactured so that only air, not dust, will pass through the paper and as such the dust bag must not be re-used.

DO NOT use the dust bag and re-usable filter for wet or sharp materials.

5. WET VACUUM CLEANING

5.1. Ensure the machine is unplugged from the power supply. Make sure the tank is clean and free from dust and dirt.
5.2. Remove the dust bag and re-usable filter; ensure the foam filter is clean and dry. Place the foam filter over the basket filter and adjust carefully.
5.3. Fit the required accessories or tubes to the suction hose.
5.4. Ensure the switch is 'Off' (position 'I') before plugging into the power supply.
5.5. Turn the switch to 'On' (position:

( )

5.6. After use, empty the tank and dry.

To vacuum large quantities of liquid, from a sink or tank etc., do not immerse the nozzle completely in the liquid; leave a gap at the top of the nozzle opening to allow an air inflow. The machine is fitted with a float valve which blocks the suction action when the tank has reached its maximum capacity. The user will notice an increase in motor noise. When this happens, turn off the machine, disconnect from power supply, remove the head from the tank and empty the liquid into a suitable receptacle or drain. To continue vacuuming, refit the head and proceed. After wet vacuuming, turn the machine off and remove plug from power supply. Empty the tank and clean/dry the inside and outside before storage.

Remember! After wet vacuuming the foam filter must be removed and the re-usable filter or the dust bag must be fitted before dry vacuuming again.

6. MAINTENANCE

6.1. Ensure the machine is unplugged from the power supply.
6.2. Disconnect the hose from the tank.
6.3. Undo the clasps and remove the motor head from the tank.
6.4. Clear out any dirt or debris from the tank and hose.
6.5. Clean the foam filter by washing it

in a mild soapy solution.

6.6. Check the hoses and attachments regularly, and check the power cable to make sure it is not damaged.

7. TROUBLESHOOTING

Cleaner will not operate.	1. No power supply.2. Faulty power cable, switch or motor.3. Tank full of liquid.	1. Check supply.2. Unit has to be checked, repaired or exchanged by qualified service experts.3. Empty tank
Dust comes from the motor cover.	1. Dust bag or filter missing, damaged or badly fitted.	1. Re-fit or replace dust bag or filter.
Reduced efficiency and increased motor noise /vibration.	1. Dust bag full.2. Nozzle, hose or tank inlet blocked.	1. Replace dust bag.2. Check nozzle, hose and tank inlet for blockage.

8. CONSUMABLES

Dust Bag-Set

Reusable Filter Set

Foam Filter Set

IMPORTANT! YOU MUST CHANGE THE REUSABLE FILTER AND DUST BAG REGULARLY. IF THE MACHINE IS USED WITHOUT THE RE-USABLE FILTER OR A DUST BAG THE MOTOR WILL BURN OUT PREMATURELY AND YOUR GUARANTEE WILL BE INVALIDATED. ALWAYS KEEP A PACK OF SPARE BAGS HANDY.

LG Electronics Inc.

http://www.lge.com

Aspiradora

Manual de dueño

Modelo:VP0716WNVQD

3. Asamblea