XPB - Uncategorized CATA - Free user manual and instructions
Find the device manual for free XPB CATA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kitchen extractor hood |
| Brand | CATA |
| Model | XPB |
| Installation Type | Wall-mounted |
| Width | 60 cm |
| Depth | 45 cm |
| Height | 15 cm |
| Net Weight | 10 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 150 W |
| Fan Speeds | 3 speeds |
| Max Extraction Flow | 350 m³/h |
| Noise Level | 55 dB (approx) |
| Lighting | LED, 2 x 1.5 W |
| Grease Filter Type | Aluminium mesh, washable |
| Charcoal Filter | Optional for recirculation mode |
| Control Type | Electronic push buttons |
| Ducting Type | Ducted/extraction or recirculation |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 3-6 months |
| Safety Features | Do not operate without grease filter; keep away from open flame |
| Spare Parts Availability | Filters, LEDs, switch replacements widely available |
Frequently Asked Questions - XPB CATA
How do I clean the grease filters on my CATA XPB?
Remove the aluminium mesh filter and wash it in warm soapy water or in the dishwasher at low temperature. Dry thoroughly before reinstalling. Clean at least once a month for optimal performance.
How often should I replace the charcoal filter?
If your hood is in recirculation mode, replace the charcoal filter every 3-6 months, depending on cooking frequency.
What is the correct installation height for the hood?
The recommended distance between the hob and the bottom of the hood is 65-75 cm for electric hobs and 75-85 cm for gas hobs.
Why is my hood noisy?
Check if the ducting is blocked or the filter is dirty. Ensure installation is stable to avoid vibrations. Use lower speed which reduces noise.
Can I use the hood without the grease filter?
No, operating without the grease filter can damage the motor and creates a grease hazard. Always use the hood with the filter installed.
How do I change the LED bulbs?
Switch off the power, locate the LED module, turn it counterclockwise to remove, and replace with the same type. Wear gloves to avoid touching the bulb with fingers.
How do I switch between extraction and recirculation mode?
Extraction requires external ducting; recirculation uses charcoal filters. Refer to the installation diagram to adjust the internal flap and fit the charcoal filter.
What should I do if the hood doesn't extract properly?
Check and clean the grease filters, clear any duct blockages, and ensure the room is well ventilated. If the issue persists, inspect the fan blade and motor.
How can I reduce energy consumption?
Use the lower speed for light cooking and turn the hood off 5-10 minutes after finishing. Additionally, switch off the LED lights when not needed.
Is it safe to leave the hood on while cooking?
Yes, but always supervise the hood and never leave it unattended with high heat. Ensure it is installed at the correct height and filters are in place.
User questions about XPB CATA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XPB - CATA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XPB by CATA.
USER MANUAL XPB CATA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CATA
Model : XPB
Category : Uncategorized