CPA - Uncategorized CATA - Free user manual and instructions
Find the device manual for free CPA CATA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cooker hood (range hood) |
| Brand | CATA |
| Model | CPA |
| Colour | Stainless steel |
| Installation type | Wall-mounted |
| Width | 60 cm |
| Weight | 12 kg |
| Power supply | 220-240 V, 50 Hz |
| Motor power | 250 W |
| Number of speeds | 3 |
| Extraction capacity | 600 m³/h |
| Noise level | 65 dB (max speed) |
| Lighting | 2 × 1.5 W LED |
| Control type | Electronic push buttons |
| Grease filters | Washable aluminium filters |
| Installation modes | Ducted or recirculation |
| Energy class | B |
| Safety features | Thermal overload protection |
| Scope of delivery | Main unit, filters, fixing kit, user manual |
| Spare parts availability | Filters and LED lights available |
| Repairability index | 7/10 |
Frequently Asked Questions - CPA CATA
How do I clean the grease filters?
To maintain extraction efficiency, remove the aluminium grease filters and wash them in warm soapy water or in the dishwasher. Allow them to dry completely before reinstalling. Clean them at least once a month.
Can the cooker hood be used in recirculation mode?
Yes. For recirculation mode, you need to install a carbon filter which is not supplied as standard. Please contact your dealer to purchase the compatible activated carbon filter.
How often should I replace the carbon filter?
The carbon filter should be replaced every 3 to 6 months depending on usage intensity. A saturated filter will reduce performance and may retain odors.
What does the thermal overload protection do?
The motor has a built-in thermal protector that switches off the unit automatically if the motor overheats, preventing fire hazards. Wait for it to cool down before restarting.
Why is the hood noisy?
Noise can be caused by a blocked filter, inappropriate ducting, or resonance from the fixing points. Ensure filters are clean and the unit is mounted correctly. The noise level increases at higher speeds by design.
How do I change the LED lights?
Disconnect the power supply first. Remove the lighting cover or snap out the LED module. Replace it with the same type of LED lamp (2 x 1.5 W) and reassemble.
Is it possible to reduce the noise level?
You can reduce noise by using a lower speed when cooking lightly. Also, check that the ducting is not too small or has sharp bends. Use insulated ducting to reduce noise.
What should I do if the buttons don't respond?
Make sure your hands are dry and the control panel is not damaged. Try switching off the power for a few minutes and then on. If the issue persists, contact technical support.
Can I install the hood myself?
Installation should be done by a qualified technician to ensure correct electrical connection and compliance with regulations. The manual provides instructions but professional help is recommended.
What are the maintenance recommendations?
Clean the exterior with a damp cloth, avoid abrasive products. Wash grease filters monthly, replace carbon filters as needed. Check the ducting regularly for obstructions. Ensure adequate ventilation when using gas appliances.
User questions about CPA CATA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CPA - CATA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPA by CATA.
USER MANUAL CPA CATA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CATA
Model : CPA
Category : Uncategorized