XSE - Uncategorized CATA - Free user manual and instructions
Find the device manual for free XSE CATA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted cooker hood |
| Brand | CATA |
| Model | XSE |
| Colour | Stainless steel |
| Material | Stainless steel and tempered glass |
| Dimensions (W x D x H) | 900 x 500 x 500 mm |
| Weight | 15 kg |
| Power Supply | 230 V / 50 Hz |
| Rated Power | 250 W |
| Noise Level (max) | 65 dB(A) |
| Number of Speeds | 3 |
| Control Type | Electronic push buttons |
| Lighting | 2 x 3 W LED |
| Air Flow Capacity (max) | 900 m³/h |
| Installation | Wall-mounted |
| Grease Filter Type | Dishwasher-safe aluminium filter |
| Carbon Filter | Optional (for recirculation mode) |
| Functions | Extraction and recirculation |
| Safety | Thermal cut-out switch |
| Certifications | CE |
| Warranty | 2 years |
| In the Box | Hood, telescopic chimney, mounting kit, user manual |
Frequently Asked Questions - XSE CATA
What is the correct installation height for the CATA XSE hood?
The recommended installation height is between 65 and 75 cm above electric hobs and between 75 and 85 cm above gas hobs. Always follow the safety distances mentioned in the manual.
How do I clean the grease filters?
The aluminium grease filters are dishwasher-safe. Remove them, place them in the dishwasher at a low temperature, or clean them manually with warm soapy water. Dry them completely before reinstalling.
Can the CATA XSE hood be used in recirculation mode?
Yes, the hood supports recirculation mode. You need to install an optional carbon filter to absorb odours. This mode is ideal when ducting outside is impossible.
How do I replace the LED lights?
First disconnect the hood from the power supply. Open the light cover, then remove the faulty LED module and replace it with a new one of the same type (3 W LED, G4 base). Reconnect and test.
What does the thermal cut-out switch do?
The thermal cut-out protects the motor from overheating. If the motor exceeds a certain temperature, the switch automatically turns off the hood to prevent damage. Let it cool down and restart.
How often should the carbon filter be replaced?
The carbon filter should be replaced every 3 to 6 months depending on usage. If you cook frequently with grease, replace it more often to maintain maximum odour absorption.
Why is my CATA XSE hood noisy?
Noise can increase if the filters are clogged or if the ducting has sharp bends. Regularly clean the grease filters and check that the ducting is properly installed and not obstructed.
Can I control the hood remotely?
No, the CATA XSE is equipped with electronic push buttons located on the front panel. It does not include a remote control, but you can control the speeds and lighting directly on the device.
What is the maximum airflow of this hood?
The maximum airflow capacity is 900 m³/h, which is suitable for kitchens up to 40 m². You can select from 3 speeds to adjust the extraction power.
Where can I find the user manual for the CATA XSE?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version in your language by email.
User questions about XSE CATA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XSE - CATA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XSE by CATA.
USER MANUAL XSE CATA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CATA
Model : XSE
Category : Uncategorized