Thalassa Pro 12 - Range hood CATA - Free user manual and instructions
Find the device manual for free Thalassa Pro 12 CATA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | CATA |
| Model | Thalassa Pro 12 |
| Width | 1200 mm |
| Depth | 500 mm |
| Height (Adjustable) | 850 - 1200 mm |
| Mounting / Installation | Wall-mounted (chimney) |
| Ducting Diameter | 150 mm |
| Maximum Extraction Capacity | 1200 m³/h |
| Speed Levels | 3 + Intensive boost |
| Noise Level (Max) | 65 dB(A) |
| Lighting | 2 x LED strip (3 W each) |
| Controls | Electronic touch control |
| Filter Type | Aluminum grease filter |
| Number of Filters | 3 filters |
| Motor Power | 160 W |
| Energy Efficiency Class | A |
| Safety Features | Overheat protection and filter saturation alarm |
| Cleaning and Maintenance | Dishwasher-safe grease filters; wipe exterior with damp cloth |
| Spare Parts & Repair | Replacement filters, LED modules, and motors available |
Frequently Asked Questions - Thalassa Pro 12 CATA
How often should I clean the grease filter?
The grease filter should be cleaned every 2-3 months, or more frequently for intensive use. You can clean it in a dishwasher or manually with hot water and mild detergent. A dirty filter reduces performance and increases noise.
How do I replace the LED lights?
First, switch off the hood and disconnect it from the power supply. Locate the LED module in the canopy, gently remove the clip or screw, and unplug the old module. Replace it with a compatible G4 LED module from CATA.
Can I use the hood in recirculation mode without ducting?
Yes, you can install a carbon filter (purchased separately) to use the hood in recirculation mode. The air is filtered and redirected into the kitchen.
How do I reset the filter saturation indicator?
After cleaning the filters, press and hold the timer button for 5 seconds until the indicator light turns off. Refer to the manual for the exact sequence for your model.
What is the recommended installation height for the Thalassa Pro 12?
The recommended height from the hob to the lower surface is 65-75 cm for electric hobs and 75-85 cm for gas hobs. Ensure the ducting has a smooth path to the outside.
Does the hood come with a remote control?
This model is equipped with electronic touch controls on the front panel. A dedicated remote control is not included, but some may be compatible as an accessory. Check with CATA support.
Why is the hood noisy and how can I reduce it?
Noise can be caused by a clogged filter, loose ducts, or an unbalanced fan. Clean the filters, check the ducting connections, and ensure the hood is mounted securely. The intensive boost mode is the loudest; use it sparingly.
Can the ducting be installed horizontally?
Yes, the ducting can be routed horizontally with a maximum length of 3 meters and a gradual slope downward toward the outside. Avoid sharp bends to maintain optimal air flow.
What is the extraction capacity and is it suitable for a large kitchen?
The maximum extraction capacity is 1200 m³/h, which can handle kitchens up to 35-40 m² depending on ceiling height. For very large open-plan kitchens, consider using an additional recirculation mode.
How do I maintain the hood's performance over time?
Regularly clean the grease filters every 2-3 months, replace the carbon filters if in recirculation mode, and wipe the exterior with a soft damp cloth. Schedule a yearly professional check-up to inspect the fan motor and ducting.
User questions about Thalassa Pro 12 CATA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Thalassa Pro 12 - CATA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Thalassa Pro 12 by CATA.