K10WII - Water heater GORENJE - Free user manual and instructions
Find the device manual for free K10WII GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Gorenje |
| Model | K10WII |
| Capacity | 10 Liters |
| Power Consumption | 2000 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Heating Time | Approximately 25 minutes to 65°C |
| Temperature Range | 30-75°C |
| Mounting | Wall-mounted, horizontal |
| Water Connections | 1/2 inch inlet and outlet |
| Pressure Rating | 6 bar |
| Safety Features | Overheat protection, safety pressure valve, dry heating protection |
| Interior Material | Enamel-coated steel |
| Control | Mechanical thermostat with indicator light |
| Insulation | High-density polyurethane foam |
| Dimensions (H x W x D) | 275 x 280 x 335 mm |
| Weight (Empty) | 6.5 kg |
| Inlet/Outlet Position | Bottom connections |
| Energy Efficiency Rating | Class A |
| Maintenance | Descaling and anode replacement as required |
| Installation Recommendation | Qualified professional required |
| Warranty | 2 years |
Frequently Asked Questions - K10WII GORENJE
How do I install the Gorenje K10WII water heater?
Installation should be carried out by a qualified professional. Mount the heater horizontally on a wall, connect the 1/2 inch water inlet and outlet, and wire the 220-240V supply. Ensure the pressure safety valve is properly connected.
What maintenance does the K10WII require?
Regular maintenance includes descaling to remove limescale and checking or replacing the magnesium anode every 1-2 years to protect the tank from corrosion.
How long does it take to heat the water to the maximum temperature?
The K10WII heats 10 liters of water from cold to 65°C in approximately 25 minutes, depending on the inlet water temperature.
Is the K10WII safe to use in a bathroom?
Yes, the heater is designed with splash-proof protection and can be installed in Zone 2 of a bathroom, provided it is mounted away from direct water spray and follows local regulations.
Can the K10WII supply hot water to multiple taps?
This 10-liter model is primarily intended for one sink, such as a kitchen sink or a bathroom basin. For multiple outlets, a larger capacity water heater is recommended.
What should I do if the water heater leaks?
First, turn off the power supply and close the water inlet valve. Check if the leak comes from loose connections, the pressure valve, or the tank itself. If the tank is leaking, contact the service center for replacement.
How can I adjust the water temperature on the K10WII?
The temperature is controlled by a mechanical thermostat knob on the front panel. Turn it to a lower setting for cooler water or to a higher setting for hotter water, then allow time for the heater to reach the new temperature.
Does the K10WII require a dedicated electrical circuit?
Yes, due to its 2000W power rating, it is recommended to use a dedicated circuit with a suitable fuse breaker (typically 10A) to prevent overloading other appliances.
What is the maximum operating water pressure?
The K10WII is designed to operate with a maximum water pressure of 6 bar (approx. 87 psi). If your home pressure is higher, install a pressure reducing valve.
Can the anode be replaced by the user?
Replacing the anode involves opening the heater and plumbing connections. It should be done by a professional technician to avoid damage and to ensure the warranty remains valid.
User questions about K10WII GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual K10WII - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K10WII by GORENJE.
USER MANUAL K10WII GORENJE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GORENJE
Model : K10WII
Category : Water heater