MS527E - Projector BENQ - Free user manual and instructions
Find the device manual for free MS527E BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Video projector |
| Brand | BenQ |
| Model | MS527E |
| Projection technology | DLP |
| Native resolution | SVGA (800 x 600) |
| Brightness | 3,300 ANSI lumens |
| Contrast ratio | 13,000:1 |
| Aspect ratio | 4:3 native, 16:9 supported |
| Lamp type | Replaceable projector lamp |
| Lamp life | Up to 10,000 hours in energy-saving mode |
| Keystone correction | Vertical ±40 degrees |
| Zoom | Manual 1.1x zoom |
| Focus | Manual focus |
| Connectors | VGA, HDMI, Composite, S-Video, audio in/out |
| Integrated speaker | 2 W mono |
| Noise level | 33 dB normal, 29 dB eco mode |
| Power consumption | 270 W typical, <0.5 W standby |
| Power supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W x H x D) | 283 x 222 x 95 mm |
| Weight | 1.8 kg |
| Maintenance | Accessible lamp compartment, air filter cleaning |
| Security | Kensington lock slot, security password |
| Repairability | User-replaceable lamp and detachable AC cord |
Frequently Asked Questions - MS527E BENQ
How do I change the lamp on my BenQ MS527E?
Turn off and unplug the projector, wait for the lamp to cool. Remove the lamp cover screw, slide out the old lamp, insert the new BenQ replacement lamp, and reset the lamp hours via the onscreen menu.
How can I clean the air filter?
Use a vacuum cleaner on low power to gently remove dust from the filter grille. Replace the filter if it is damaged or clogged. Clean the filter every 2,000 hours to maintain airflow.
What is the best way to connect a laptop?
Use a VGA cable from your laptop to the PC/VGA input, then select the correct source with the Source button. For better quality, use HDMI if available.
Can I use the projector on a ceiling mount?
Yes, the BenQ MS527E supports standard ceiling installation. Use a compatible mount and follow the safety instructions to secure the projector and route cables safely.
How do I adjust keystone distortion?
Press the Keystone button on the remote or on the keypad to display the keystone correction slider. Adjust the angle up or down until the image is rectangular.
How do I reset the lamp timer?
After replacing the lamp, go to the System Setup menu, select Advanced, enter the lamp reset option, and press OK. The lamp hours will be recalculated automatically.
What is the maximum screen size?
The projector projects from about 60 to 300 inches diagonal depending on distance and zoom. At about 3 m, you can get a roughly 100-inch image.
Does the projector support 3D content?
Yes, it supports 3D projection via DLP Link with compatible 3D glasses and Blu-ray players or graphics cards. Enable 3D in the display settings.
How do I get sound out of the projector?
The built-in speaker outputs 2 W. For louder audio, connect external speakers to the audio output socket or use the audio-in when using VGA.
What should I do if the projector won't turn on?
Check that the power cord is connected and the wall switch is on. Wait 60 seconds after the LED remains orange. Replace the fuse if needed or contact support.
User questions about MS527E BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual MS527E - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS527E by BENQ.
USER MANUAL MS527E BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : MS527E
Category : Projector