BENQ

MW561 - Projector BENQ - Free user manual and instructions

Find the device manual for free MW561 BENQ in PDF.

📄 51 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BENQ MW561 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type DLP Projector
Model MW561
Display Technology DLP
Native Resolution WXGA (1280 x 800)
Brightness 3000 ANSI Lumens
Contrast Ratio 13000:1
Aspect Ratio 16:10 (native), 16:9, 4:3 compatible
Lamp Type UHP
Lamp Life 4500 hours (Normal), 6000 hours (Eco)
Projection Lens F=2.56-2.68, f=22.04-24.14 mm
Zoom Ratio 1.1:1
Throw Ratio 1.55-1.70 (16:10)
Image Size 30" to 300"
Keystone Correction Vertical ± 40 degrees
Input Ports HDMI, VGA, Composite Video, S-Video, Audio 3.5mm
Output Ports VGA, Audio
Speaker 2W Mono
Noise Level 33 dB (Normal), 31 dB (Eco)
Power Consumption 275W (Normal), <0.5W Standby
Power Supply AC 100-240V, 50/60Hz
Dimensions (W x H x D) 302 x 124 x 232 mm
Weight 2.55 kg
Operating Temperature 0°C to 40°C
Safety Features Kensington Lock, OSD lock

Frequently Asked Questions - MW561 BENQ

How do I replace the lamp on my BenQ MW561?
Turn off and unplug the projector. Wait 30 minutes for cooling. Remove the lamp cover screw, slide off the cover. Unscrew the lamp module, pull it out by the handle. Insert new lamp, tighten screws, replace cover. Reset the lamp hour counter in the OSD menu (Settings -> Lamp Settings).
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal screen (16:10 aspect ratio), the throw distance is approximately 3.0 to 3.3 meters. Use the formula: distance = width x throw ratio. The projector's throw ratio is 1.55-1.70, and a 100-inch 16:10 screen width is about 2.15 meters.
How to clean the air filter on the MW561?
Turn off the projector and unplug it. Remove the filter cover on the side. Take out the filter and gently clean it with a soft brush or vacuum cleaner. Do not wash with water. If heavily soiled, replace the filter. Reinstall and close the cover.
Can I connect my laptop wirelessly to the BenQ MW561?
The MW561 does not have built-in wireless. For wireless projection, you need an external wireless adapter (e.g., BenQ QCast or a third-party HDMI dongle) that plugs into the HDMI port. Then, use screen mirroring on your laptop.
What is the keystone correction range?
The keystone correction is vertical only, with a range of ±40 degrees. It is adjusted via the OSD menu or by pressing the keystone buttons on the remote. Note that digital keystone may slightly reduce image quality.
How do I reset the lamp hour counter?
After replacing the lamp, go to the OSD menu: Settings -> Lamp Settings -> Lamp Reset. Press OK. A confirmation dialog appears; select 'Yes' to reset. This ensures accurate lamp hours tracking.
The projector turns off suddenly. What could be the cause?
Common causes: overheating (check air filter and ventilation), lamp failure (replace lamp), power supply issues, or a faulty temperature sensor. The projector has protective shutdown. Check the status LED: solid red indicates lamp error, blinking red indicates thermal error. Refer to manual for troubleshooting.
Does the BenQ MW561 support 3D content?
Yes, it supports DLP Link 3D. You need active shutter glasses (optional). In the OSD, enable 3D mode from Display -> 3D. Ensure the source outputs 3D signal (e.g., side-by-side or frame sequential). Note that VGA input does not support 3D; use HDMI.
How to adjust the focus and zoom?
The focus and zoom are manual. Rotate the focus ring on the lens to sharpen the image. Rotate the zoom ring to adjust the image size. For best results, set projector at a fixed distance, then adjust focus, then zoom if needed.
What is the warranty period for the BenQ MW561?
BenQ typically offers a 3-year projector warranty for parts and labor (in many regions). The lamp has a separate 90-day or 1000-hour warranty, whichever comes first. Register the product online for extended support. Check your local dealer for exact terms.

User questions about MW561 BENQ

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Projector in PDF format for free! Find your manual MW561 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MW561 by BENQ.

USER MANUAL MW561 BENQ

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BENQ

Model : MW561

Category : Projector