MP513 - Projector BENQ - Free user manual and instructions
Find the device manual for free MP513 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Projector |
| Brand | BenQ |
| Model | MP513 |
| Native Resolution | SVGA (800 x 600) |
| Brightness | 2000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Projection Distance | 1.5 m - 12.2 m |
| Image Size | 25.6 in - 308 in |
| Lamp Life | 3000 h (Normal) / 4000 h (ECO) |
| Built-in Speaker | 2 W x 1 |
| Input Ports | VGA, S-Video, Composite, USB |
| Noise Level | 32 dBA (Normal Mode) |
| Dimensions (W x H x D) | 273 mm x 90 mm x 189 mm |
| Weight | 2.5 kg |
| Power Consumption | 230 W (Typical) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Maintenance | Clean air filter every 100 hours; replace lamp when necessary |
| Safety Features | Overheat protection, Auto-off after idle period |
| Spare Parts | Replacement lamp assembly available |
Frequently Asked Questions - MP513 BENQ
How do I connect the BenQ MP513 to my laptop?
Use a VGA cable to connect the projector's VGA input port to your laptop's external monitor port. Press the Source button on the projector or remote control and select VGA as the input source.
How long does the lamp last and when should I replace it?
The lamp lasts approximately 3000 hours in Normal mode and 4000 hours in ECO mode. When the lamp indicator lights up or the image becomes dim, replace it with a compatible BenQ lamp.
Why is the projector not turning on?
Check that the power cable is securely connected and the wall outlet works. Make sure the power switch is in the ON position. If the indicator light is blinking, it may indicate overheating or a lamp issue.
How do I clean the air filter?
Turn off the projector and unplug it. Locate the filter cover on the side or bottom. Remove the filter, wash it with warm, soapy water, rinse, and let it dry completely before reinstalling. Clean it every 100 hours.
Can I use a USB cable to play videos from a computer?
The USB port on the MP513 is primarily for firmware updates or service use, not for direct media playback. Use your computer's video output via VGA to project content.
What is the ideal projection distance for a 100-inch screen?
Based on the projector's throw ratio, a 100-inch diagonal image typically requires a projection distance of about 4.5 to 5 meters. Use the zoom control for fine adjustment.
Why does the image look blurry or distorted?
Adjust the focus ring on the lens until the image is sharp. If the image is trapezoidal, use the keystone correction function in the menu to level the edges.
How do I perform a lamp reset after replacing the lamp?
After replacing the lamp, plug in the projector, turn it on, and use the on-screen menu. Navigate to System Setup > Lamp Settings and select Lamp Reset to clear the lamp hour counter.
Can this projector be mounted on the ceiling?
Yes, the MP513 is compatible with a standard ceiling mount. Use a BenQ or compatible mount, and adjust the projection settings using Ceiling mode in the menu for proper image orientation.
What maintenance is required for long-term reliability?
Regularly clean the air filter, keep the vents dust-free, ensure adequate ventilation, and avoid operating in hot or humid environments. Periodically check the lamp hour counter and replace the lamp when needed.
User questions about MP513 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual MP513 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP513 by BENQ.
USER MANUAL MP513 BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : MP513
Category : Projector