107/1777 - Loudspeaker BUSH - Free user manual and instructions
Find the device manual for free 107/1777 BUSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | Bush |
| Model | 107/1777 |
| Dimensions (W x H x D) | 180 mm x 300 mm x 220 mm |
| Weight per Speaker | 3.2 kg |
| RMS Power Handling | 15 W |
| Peak Power Handling | 40 W |
| Frequency Response | 70 Hz – 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 88 dB (1W/1m) |
| Drivers | 4" woofer, 1" tweeter |
| Connectivity | Wired binding posts |
| Enclosure Type | Bass reflex with front port |
| Cabinet Material | MDF with vinyl or wood finish |
| Recommended Amplifier Power | 10–30 W per channel |
| Recommended Room Size | 10–25 m² |
| Placement | Bookshelf, stand or wall-mount |
| Cleaning | Wipe with dry, soft cloth |
| Safety | Avoid moisture and extreme heat |
| Spare Parts Availability | Contact Bush support for drivers and crossovers |
| Repairability | Replaceable tweeter and woofer units |
Frequently Asked Questions - 107/1777 BUSH
How do I connect the Bush 107/1777 loudspeaker to an amplifier?
Use standard speaker wire. Connect the red terminal on the speaker to the positive output of your amplifier, and the black terminal to the negative output. Ensure a secure connection to avoid sound dropouts.
Where should I place these speakers for optimal sound quality?
Place the speakers at ear level when seated, ideally 20–30 cm away from walls to reduce bass boom. Angle them slightly toward the listening position for better stereo imaging.
Can I use these speakers with a subwoofer?
Yes, the 107/1777 are full-range speakers, but adding a subwoofer can enhance low frequencies. Connect the subwoofer to the amplifier's subwoofer output if available.
What amplifier power is recommended for the Bush 107/1777?
An amplifier with 10 to 30 watts per channel is recommended. This range provides sufficient volume and avoids distortion or damage to the drivers.
How should I clean the speaker cabinet?
Use a soft, dry or slightly damp cloth to wipe the cabinet. Do not use abrasive cleaners or solvents, as they may damage the finish. Keep the grille clean with a gentle brush or vacuum.
Are these speakers magnetically shielded?
Most Bush standalone speakers are not magnetically shielded. Keep them at least 30 cm away from CRT televisions or monitors to avoid picture interference.
Can I mount the 107/1777 on a wall?
Yes, if the cabinet has keyhole slots or threaded inserts for brackets. Use appropriate wall fixings suitable for the speaker's weight (3.2 kg each).
What is the impedance of these speakers?
The nominal impedance is 8 ohms. This is compatible with most home amplifiers and receivers. Check your amplifier's ratings to confirm support for 8-ohm loads.
How do I replace a blown tweeter or woofer?
Remove the grille and unscrew the driver from the cabinet. Disconnect the wires, then install the replacement part, ensuring correct polarity. Contact Bush support for genuine spare parts.
What is the frequency response of these speakers?
The frequency response is 70 Hz to 20 kHz, making them suitable for music and home entertainment. For deep bass below 70 Hz, consider adding a subwoofer.
User questions about 107/1777 BUSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual 107/1777 - BUSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 107/1777 by BUSH.
USER MANUAL 107/1777 BUSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BUSH
Model : 107/1777
Category : Loudspeaker