DS 12DVB2 - Drill HITACHI - Free user manual and instructions
Find the device manual for free DS 12DVB2 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill/driver |
| Brand | Hitachi |
| Model | DS 12DVB2 |
| Rated voltage | 12 V |
| Power supply type | Rechargeable 12 V battery |
| Charger | Fast charger included |
| Chuck | Self-tightening 10 mm chuck |
| No-load speed | 0 to 600 rpm |
| Variable speed | Yes, electronic speed control |
| Direction reversal | Forward / reverse |
| Torque | 20 positions with stop |
| Drilling capacity in steel | 10 mm |
| Drilling capacity in wood | 25 mm |
| Work light | Integrated LED lamp |
| Weight | Approximately 1.4 kg |
| Dimensions | 250 × 70 × 200 mm |
| Handle | Ergonomic handle with rubber coating |
| Maintenance | Clean the exterior with a dry, lint-free cloth |
| Safety | Wear safety glasses and insulating gloves |
| Spare parts | Available from Hitachi after-sales service |
| Repairability | Replaceable motor brushes |
| Package contents | Drill, battery, charger, case, instruction manual |
Frequently Asked Questions - DS 12DVB2 HITACHI
How to charge the battery of the Hitachi DS 12DVB2 drill?
Connect the supplied charger to a mains outlet, insert the battery into the charger. The indicator lights up red during charging and turns green when it is complete. A full charge takes about 1 hour. Only use the charger compatible with this 12 V battery.
How to reverse the direction of rotation?
To reverse rotation, slide the direction switch located above the trigger. Move it to the left to screw, to the right to unscrew. Make sure the tool is completely stopped before changing direction.
How to replace the chuck?
To replace the self-tightening chuck, insert an Allen key into the chuck and turn counterclockwise to release the locking screw. Then remove the chuck by turning clockwise. Install the new chuck by reversing the procedure.
What torque should be used for screwing?
Set the torque ring to a low value for small screws, then increase gradually. Start with setting 1 and test on a piece of wood. Use the drilling mode (drill symbol) for holes. This prevents damaging the screw or the surface.
How to maintain the drill?
After use, dust the tool with a dry cloth. Regularly check the motor brushes and replace them if worn. Clean the ventilation slots to ensure optimal cooling. Store the drill in its case, away from moisture.
What to do if the drill does not start?
Check that the battery is charged and properly engaged. Also check that the direction of rotation is not in neutral position (if available). If the problem persists, the motor brushes may be worn; replace them. Contact Hitachi after-sales service if necessary.
Can standard drill bits be used with this chuck?
Yes, the 10 mm chuck accepts all cylindrical bits up to 10 mm in diameter. For hexagonal bits, use an adapter. Tighten the chuck firmly to prevent any slipping during use.
How to replace the motor brushes?
Unscrew the side caps of the motor (if accessible) or remove the casing. Remove the old brushes, insert the new ones respecting their direction, then screw back. The brushes must be replaced in pairs. Use original Hitachi parts.
What is the drilling capacity of this drill?
This drill can drill up to 10 mm in steel and 25 mm in wood with standard bits. For larger holes, use hole saws within the power limit of the tool.
How to store the drill when not in use?
Remove the battery from the drill before storage. Store the battery in a dry place at moderate temperature. Keep the drill in its original case to avoid dust. Recharge the battery every 3 months to maintain its capacity.
User questions about DS 12DVB2 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DS 12DVB2 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS 12DVB2 by HITACHI.
USER MANUAL DS 12DVB2 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : DS 12DVB2
Category : Drill