DH 24PF3 - Drill HITACHI - Free user manual and instructions
Find the device manual for free DH 24PF3 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hitachi |
| Model | DH 24PF3 |
| Product type | Rotary hammer drill |
| Drilling capacity (concrete) | 24 mm |
| Drilling capacity (steel) | 13 mm |
| Drilling capacity (wood) | 32 mm |
| Power input | 800 W |
| No-load speed | 0 – 1100 rpm |
| Impact rate | 0 – 4600 bpm |
| Impact energy (EPTA) | 2.7 J |
| Tool holder | SDS-Plus |
| Weight (with cable) | 2.5 kg |
| Overall length | 370 mm |
| Power supply | 230 V, 50 Hz |
| Protection class | Class II (double insulation) |
| Power cable | 2.5 m |
| Operating modes | Drilling, hammer drilling, chiseling |
| Variable speed | Electronic |
| Shaft lock | Yes |
| Auxiliary handle | Included, adjustable |
| Depth stop | Included |
| Transport case | Included |
| Maintenance and cleaning | Clean ventilation slots regularly with a dry brush. Lubricate the tool holder. |
| Safety | Safety clutch, emergency stop, restart protection |
Frequently Asked Questions - DH 24PF3 HITACHI
How to change the chuck of the DH 24PF3?
The DH 24PF3 is equipped with an SDS-Plus tool holder. To change a bit, pull the collar back, insert the bit, and release the collar. To remove, pull the collar again.
What is the maximum drilling capacity in concrete?
The maximum drilling capacity in concrete is 24 mm with SDS-Plus bits.
Can I use this drill for screwdriving?
No, the DH 24PF3 is a rotary hammer drill designed for drilling and chiseling. It is not suitable for screwdriving.
How to adjust the speed?
The speed is electronically controlled by pressing the trigger more or less. A variable speed trigger allows progressive control.
What are the available operating modes?
Three modes: drilling (rotation only), hammer drilling (rotation + impact), and chiseling (impact only with rotation disabled).
What to do if the drill does not start?
First check the power supply and cable. Ensure the safety clutch is not engaged. If the problem persists, consult an authorized service center.
How to maintain the SDS-Plus tool holder?
Clean the tool holder regularly with a dry cloth and apply a thin layer of special SDS grease to prevent wear.
What is the noise level of this tool?
The sound pressure level is approximately 92 dB(A) and sound power level 103 dB(A). Wear hearing protection.
Can the chisel be adjusted to different positions?
Yes, the chisel can be set to 12 different positions for optimal work. Turn the adjustment ring to select the desired angle.
Where to find spare parts?
Spare parts are available from authorized Hitachi/Metabo HPT dealers. You can also contact customer service.
User questions about DH 24PF3 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DH 24PF3 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH 24PF3 by HITACHI.
USER MANUAL DH 24PF3 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : DH 24PF3
Category : Drill