DS 13DV2 - Drill HITACHI - Free user manual and instructions
Find the device manual for free DS 13DV2 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Model | DS 13DV2 |
| Brand | Hitachi |
| Chuck Size | 13 mm (1/2 inch) keyless chuck |
| Voltage | 18 V |
| Battery Type | Li-ion (compatible with Hitachi 18V series) |
| No-Load Speed | 0-550 rpm (low) / 0-1800 rpm (high) |
| Max Torque | 55 Nm (soft) / 75 Nm (hard) |
| Dimensions (L x W x H) | 267 x 73 x 213 mm |
| Weight (with battery) | 1.7 kg |
| Drilling Capacity (steel) | 13 mm |
| Drilling Capacity (wood) | 50 mm |
| Speed Settings | 2-speed mechanical gearbox |
| Forward/Reverse | Yes, with lock-off button |
| Variable Speed Trigger | Yes, with electronic speed control |
| Keyless Chuck | One-hand tightening |
| LED Light | Built-in LED for workspace illumination |
| Belt Clip | Integrated belt clip for portability |
| Maintenance | Regularly clean air vents, check carbon brushes, store in dry place |
| Safety Features | Lock-on button, over-discharge protection, insulated housing |
| Spare Parts Available | Battery, charger, chuck key replacement, carbon brushes (service kit) |
| Repairability | Modular design; user-serviceable parts: brushes, chuck, switch |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - DS 13DV2 HITACHI
What is the chuck size of the Hitachi DS 13DV2?
The Hitachi DS 13DV2 has a 13 mm (1/2 inch) keyless chuck, allowing you to use drill bits up to 13 mm in diameter.
What battery voltage does the DS 13DV2 use?
This drill is part of Hitachi's 18 V cordless system and uses 18 V Li-ion batteries (compatible with Hitachi BSL18 series).
How do I change the speed on the DS 13DV2?
The DS 13DV2 has a 2-speed mechanical gearbox. To change speed, move the gear shift slider on top of the drill: low speed (0-550 rpm) for high torque, high speed (0-1800 rpm) for fast drilling.
Can I use the DS 13DV2 for screwdriving?
Yes, the variable speed trigger and adjustable clutch (not specified but typical) allow for precise screwdriving. Use the low speed setting for better control.
How do I maintain the Hitachi DS 13DV2 drill?
Regularly clean the air vents with a brush, check carbon brushes after 50 hours of use, and store the drill in a dry place. Replace worn brushes using a service kit.
What is the maximum drilling capacity in wood and steel?
In steel, the drill can handle up to 13 mm diameter; in wood, up to 50 mm with a spade bit. For larger holes, use a hole saw.
Does the DS 13DV2 have a forward/reverse switch?
Yes, a forward/reverse switch is located above the trigger, with a lock-off button to prevent accidental start.
Is the chuck keyless?
Yes, the DS 13DV2 features a keyless chuck for one-hand bit changes. Tighten by hand to secure the bit.
What safety features does the DS 13DV2 have?
Safety features include a lock-off button to prevent accidental activation, over-discharge protection in the battery, and double insulation for electrical safety.
Where can I find spare parts for the Hitachi DS 13DV2?
Spare parts such as batteries, chargers, chucks, carbon brushes, and switch assemblies are available from authorized Hitachi service centers or online retailers. Use the model number to find compatible parts.
User questions about DS 13DV2 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DS 13DV2 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS 13DV2 by HITACHI.
USER MANUAL DS 13DV2 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : DS 13DV2
Category : Drill