BTi37 - Headphones Valore - Free user manual and instructions
Find the device manual for free BTi37 Valore in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth Headphones |
| Brand | Valore |
| Model | BTi37 |
| Form Factor | Over-ear, foldable |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | 10 meters |
| Battery Type | Rechargeable lithium-ion |
| Battery Capacity | 300 mAh |
| Charging Time | Approximately 2 hours |
| Playback Time | Up to 15 hours |
| Standby Time | Up to 200 hours |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Driver Diameter | 40 mm |
| Microphone | Built-in |
| Controls | On-ear buttons for music, calls and volume |
| Weight | 180 g |
| Dimensions (closed) | 180 x 160 x 80 mm |
| What's in the Box | Headphones, USB charging cable, user manual |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Do not expose to water or high temperatures |
| Spare Parts & Repairability | Contact Valore support for replacement cushions or batteries |
| Manufacturer Support | Valore customer service website |
Frequently Asked Questions - BTi37 Valore
How do I pair the Valore BTi37 headphones with my phone?
Turn on the headphones by pressing the power button for 3 seconds. Activate Bluetooth on your phone and select BTi37 from the list of available devices. The headphones will automatically enter pairing mode when turned on for the first time.
How long does the battery last?
The built-in 300 mAh battery provides up to 15 hours of playback time on a full charge. Standby time is up to 200 hours.
Can I use the headphones while charging?
Yes, you can continue listening while the headphones are connected to a power source via the charging cable. However, for optimal battery health, it is recommended to occasionally let the battery drain completely.
How do I reset the headphones?
To reset, press and hold both the volume + and − buttons for 5 seconds until the LED indicator flashes red and blue. The headphones will restart and enter pairing mode.
Are the headphones water-resistant?
No, the Valore BTi37 are not water-resistant. Avoid exposing them to rain, sweat, or moisture. Use a dry cloth for cleaning.
Can I use the built-in microphone for calls?
Yes, the BTi37 has a built-in microphone that allows you to make and receive phone calls. Press the middle button to answer or end a call.
How do I clean the ear cushions?
Gently wipe the ear cushions and headband with a soft, dry cloth. Do not use chemical cleaners or immerse them in water, as this may damage the material.
What does the blinking LED indicator mean?
A solid red light indicates charging; blue light indicates full charge. Blinking red and blue means the headphones are in pairing mode. A slow red blink indicates a low battery warning.
Can I use the headphones with a wired connection?
The BTi37 model does not include a 3.5 mm audio input, so it is wireless-only. You can connect it to any Bluetooth-enabled device.
How do I replace worn ear cushions?
Replacement ear cushions can be ordered from Valore customer service. To remove them, gently pull the old cushion off the speaker housing and snap the new one into place.
User questions about BTi37 Valore
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual BTi37 - Valore and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTi37 by Valore.
USER MANUAL BTi37 Valore
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Valore
Model : BTi37
Category : Headphones