SQF-S25M4-256G-SBE - SSD Advantech - Free user manual and instructions
Find the device manual for free SQF-S25M4-256G-SBE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Solid State Drive (SSD) |
| Brand | Advantech |
| Model | SQF-S25M4-256G-SBE |
| Form Factor | 2.5-inch |
| Storage Capacity | 256 GB |
| Interface | SATA III (6 Gb/s) |
| NAND Flash Type | MLC (Multi-Level Cell) |
| Sequential Read Speed | Up to 560 MB/s |
| Sequential Write Speed | Up to 460 MB/s |
| Dimensions (W x H x D) | 69.85 mm x 7.0 mm x 100.0 mm |
| Weight | Approx. 60 g |
| Power Consumption (Idle) | Approx. 0.6 W |
| Power Consumption (Active) | Approx. 2.5 W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| MTBF (Mean Time Between Failures) | 3,000,000 hours |
| Maintenance | No regular maintenance required; keep the SATA connector clean. |
| Cleaning | Use a dry, soft cloth to wipe the exterior; do not use liquid solvents. |
| Safety | Do not disassemble; avoid electrostatic discharge by grounding yourself. |
| Spare Parts & Repairability | Non-user-serviceable. No spare parts available; refer to an authorized service center. |
| Warranty | 3-year limited warranty |
| General Information | Industrial-grade SSD designed for embedded and edge computing applications. |
Frequently Asked Questions - SQF-S25M4-256G-SBE Advantech
What is the storage capacity of this SSD?
The Advantech SQF-S25M4-256G-SBE has a 256 GB storage capacity, ideal for operating systems and industrial applications.
What form factor is this drive?
It uses the standard 2.5-inch form factor, compatible with most laptops, desktops, and embedded systems that have a 2.5" bay.
What interface does it support?
It supports SATA III (6 Gb/s) and is backward compatible with SATA II and SATA I interfaces.
Is it compatible with my existing system?
If your system has a SATA connector and supports 2.5-inch drives, it will work. Check your system specifications for SATA compatibility.
What are the typical read and write speeds?
The sequential read speed is up to 560 MB/s and the sequential write speed is up to 460 MB/s, depending on the system configuration.
How do I install this SSD?
Connect the drive to a SATA port, secure it in a 2.5-inch bay, and use a SATA power cable. Then initialize and partition the drive via your operating system's disk management tools.
Does this SSD support TRIM for performance maintenance?
Yes, it supports the TRIM command, which helps maintain performance over time by cleaning unused blocks. Ensure your OS has TRIM enabled.
What is the warranty period?
Advantech provides a 3-year limited warranty for this industrial SSD. Check the official documentation for terms.
Can I recover data from this SSD if it fails?
Data recovery from SSDs is more complex than HDDs. It is recommended to maintain regular backups. In case of failure, contact a professional data recovery service that handles SSDs.
Is this SSD suitable for industrial applications?
Yes, it is an industrial-grade SSD designed for high endurance and reliability, with wide temperature ranges and strong shock resistance, making it ideal for embedded systems, automation, and edge computing.
User questions about SQF-S25M4-256G-SBE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your SSD in PDF format for free! Find your manual SQF-S25M4-256G-SBE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SQF-S25M4-256G-SBE by Advantech.
USER MANUAL SQF-S25M4-256G-SBE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : SQF-S25M4-256G-SBE
Category : SSD