AK-LD02-05 - Ignition AKASA - Free user manual and instructions
Find the device manual for free AK-LD02-05 AKASA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | LED ignition module / lighting controller |
| Brand | Akasa |
| Model | AK-LD02-05 |
| Category | Ignition (lighting) |
| Dimensions | 5.2 cm x 2.8 cm x 1.2 cm |
| Weight | 18 g |
| Input voltage | 12V DC |
| Output power | 2 W – 5 W |
| Operating temperature | -10°C to +40°C |
| Connector type | Push-in terminals |
| Compatibility | LED strips and fixtures with 12V input |
| Mounting | Screw mount (holes on side) |
| Housing material | ABS plastic |
| Certifications | CE, RoHS |
| Main functions | On/off switching, flicker-free ignition |
| Maintenance | Wipe with a dry, soft cloth |
| Safety features | Overload and short-circuit protection |
| Spare parts | Replacement connectors available |
| Repairability | Modular design for easy part replacement |
| Documentation | User manual (English, 1 page) |
Frequently Asked Questions - AK-LD02-05 AKASA
What is the input voltage for the Akasa AK-LD02-05?
The Akasa AK-LD02-05 operates on 12V DC. Ensure your power supply matches this voltage to avoid damage.
How do I connect the LED strip to this ignition module?
Use the push-in terminals at the output side. Insert the stripped ends of the LED strip wires into the terminals and tighten the screws securely.
Can I use this module with a 5V LED strip?
No, the module is designed for 12V systems. Using a 5V strip may result in insufficient power and could cause malfunction.
What protection features does the AK-LD02-05 have?
It includes overload protection and short-circuit protection, which automatically shut off the output to prevent damage to connected devices.
How do I mount the module?
The module has screw mounting holes on its sides. Use small screws to fasten it to a flat, non-conductive surface.
Is the AK-LD02-05 compatible with dimmers?
This module is designed for on/off ignition, not for dimming. For dimmable setups, consider a dedicated LED dimmer controller.
What should I do if the module gets hot during use?
Check that it is within the operating temperature range (-10°C to +40°C) and that the load does not exceed 5W. Improve ventilation or reduce the load if necessary.
Can I repair the module if it stops working?
Yes, the design is modular. Replace only the faulty component (e.g., connector) if possible. For internal failures, consult a qualified technician or replace the module.
How should I clean the module?
Disconnect it from power first. Wipe with a dry, soft cloth. Avoid water, solvents, or abrasive cleaners.
Does the module come with a warranty?
Most Akasa products carry a manufacturer guarantee. Check the packaging or contact your reseller for specific warranty terms and conditions.
User questions about AK-LD02-05 AKASA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual AK-LD02-05 - AKASA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AK-LD02-05 by AKASA.
USER MANUAL AK-LD02-05 AKASA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AKASA
Model : AK-LD02-05
Category : Ignition