Bolt - 3D Printer Leap Frog - Free user manual and instructions
Find the device manual for free Bolt Leap Frog in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 3D printer |
| Brand | Leap Frog |
| Model | Bolt |
| Technology | FDM (Fused Deposition Modeling) |
| Build volume | 200 x 200 x 200 mm |
| Layer resolution | 0.1 - 0.3 mm |
| Nozzle diameter | 0.4 mm |
| Max extruder temperature | 260 °C |
| Max heated bed temperature | 120 °C |
| Supported filaments | PLA, ABS, PETG, TPU |
| Print platform | Heated borosilicate glass bed |
| Connectivity | USB, SD card |
| Display | LCD 20x4 |
| Dimensions | 450 x 400 x 500 mm |
| Weight | 20 kg |
| Power supply | 230V AC, 50Hz, 350W |
| Frame construction | Aluminum extrusion |
| Maintenance | Clean bed and nozzle; check belt tension regularly |
| Safety features | Overheat protection, bed and extruder thermal cut-off |
| Spare parts | Nozzles, print beds, belts, and heater cartridges available |
| Warranty | 1 year |
Frequently Asked Questions - Bolt Leap Frog
How do I level the print bed on the Leap Frog Bolt?
The Bolt has a manual leveling process with a wing nut under the bed. Use the paper test to adjust the distance between the nozzle and the glass plate at all corners.
How do I load filament into the Bolt?
Preheat the extruder to the recommended temperature for your filament. Insert the filament into the filament drive and push it through the PTFE tube until it reaches the nozzle, then squeeze the extruder lever and push gently until molten filament comes out.
Why is my first layer not sticking to the bed?
Clean the glass bed with isopropyl alcohol or acetone. Ensure the bed is level and the nozzle height is correct. Increase the bed temperature by 5°C and set the first layer height to 0.2 mm.
What software do I need to use with the Bolt?
Leap Frog recommends Simplify3D or Ultimaker Cura. You need to import the Bolt profile or set print volume manually. The printer supports GCode files from your PC.
How do I change the nozzle?
Heat the nozzle to 240°C to soften the filament. Use a spanner to unscrew the old nozzle, then replace it with a new 0.4mm brass nozzle. Do not overtighten; tighten until snug.
What are the safety precautions for using the Bolt?
Always place the printer on a stable, heat-resistant surface. Keep children and pets away from the heated bed and extruder. Do not leave the printer running overnight or unattended.
How do I replace the filament spool?
Unload the current filament by heating the extruder and withdrawing the filament. Place the new spool on the spool holder and feed the filament into the drive as described in the loading guide.
How often should I clean the printer?
Clean the print bed after every print to ensure proper adhesion. Lubricate the rods and lead screws every few weeks. Remove dust from the electronics housing with a dry brush.
What should I do if the print stops or the nozzle jams?
Initiate a cold pull to clear the filament. Heat the nozzle to the melting point of the filament, pull out the filament rapidly. If the jam persists, replace the PTFE tube and clean the hot-end.
Where can I find the user manual for the Bolt?
You can download the official PDF manual from Leap Frog's website or via the notice-facile.com download page. The manual includes detailed assembly instructions, troubleshooting, and part diagrams.
User questions about Bolt Leap Frog
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual Bolt - Leap Frog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bolt by Leap Frog.
USER MANUAL Bolt Leap Frog
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Leap Frog
Model : Bolt
Category : 3D Printer