ZSR4154WS - Router Zonet - Free user manual and instructions
Find the device manual for free ZSR4154WS Zonet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Zonet |
| Model | ZSR4154WS |
| Wireless Standard | IEEE 802.11b/g |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Data Rate | 54 Mbps |
| Number of LAN Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Antennas | 1 detachable external antenna |
| Security Encryption | WEP, WPA, WPA2-PSK |
| VPN Support | Yes, PPTP and L2TP pass-through |
| Firewall | Built-in NAT and SPI firewall |
| DHCP | DHCP server and client support |
| Dynamic DNS | Supported |
| Quality of Service (QoS) | Traffic prioritization supported |
| Dimensions (W x D x H) | 187 x 132 x 36 mm |
| Weight | 0.32 kg |
| Power Supply | External 9V DC 1A adapter |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Relative Humidity | 10% to 90% (non-condensing) |
| Care and Cleaning | Wipe with a dry, soft cloth; avoid liquids and solvents |
| Safety Warnings | Place in a well-ventilated area away from heat sources |
| Spare Parts and Reparability | Contact Zonet support for antenna or adapter replacement |
| General Information | Compatible with Windows, Mac, and Linux systems |
Frequently Asked Questions - ZSR4154WS Zonet
How do I reset the ZSR4154WS to factory defaults?
Use a paperclip to press and hold the Reset button on the back panel for about 10 seconds until the power LED blinks. The router will reboot with default settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1 with username admin and password admin. Change these after the first login for security.
How can I improve the wireless signal range of my router?
Place the router in a central location, away from walls and metal objects. Ensure the antenna is upright and avoid interference from cordless phones or microwaves.
Can I use this router with a cable modem or DSL modem?
Yes, the WAN port supports both cable and DSL modems. Connect the modem to the WAN port using an Ethernet cable, then configure the internet connection type in the setup wizard.
How do I change the wireless network name (SSID) and password?
Log into the web interface, go to Wireless Settings, set your desired SSID and passphrase using WPA2-PSK encryption, then save and reboot the router.
What should I do if I forget my router password?
Perform a factory reset as described above. This will restore the default admin credentials, allowing you to log in again.
Does the ZSR4154WS support IPv6?
This model primarily supports IPv4. For IPv6 compatibility, consider using a newer router or checking for firmware updates on the Zonet support website.
Can I set up parental controls or content filtering?
Yes, the router includes parental control options under the Access Restrictions tab. You can block specific websites or limit internet access during certain hours.
How do I update the firmware?
Download the latest firmware from the Zonet support page, then go to System Tools > Firmware Upgrade in the router admin panel and upload the file. Do not disconnect power during the update.
The router's internet LED is off. What can I do?
Check the Ethernet cable between the modem and the router's WAN port. Restart both the modem and router. If the issue persists, clone the MAC address of your PC in the WAN settings or contact your ISP.
User questions about ZSR4154WS Zonet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ZSR4154WS - Zonet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZSR4154WS by Zonet.