DHD7000X - Range hood DE DIETRICH - Free user manual and instructions
Find the device manual for free DHD7000X DE DIETRICH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | De Dietrich |
| Model | DHD7000X |
| Category | Cooker hood |
| Installation Type | Wall-mounted |
| Width | 700 mm |
| Height | 620 mm |
| Depth | 500 mm |
| Net Weight | 15 kg |
| Airflow Capacity | 650 m³/h |
| Noise Level | 65 dB |
| Number of Speeds | 3 |
| Control Type | Electronic touch controls |
| Lighting Type | LED |
| Number of Lights | 2 |
| Filter Type | Aluminium grease filters |
| Filter Cleaning | Dishwasher safe |
| Recirculation Mode | Optional with charcoal filter |
| Power Supply | 220-240 V, 50 Hz |
| Ducting Diameter | 150 mm |
| Safety Features | Thermal fuse protection |
| Mounting Height | 650-750 mm above hob |
Frequently Asked Questions - DHD7000X DE DIETRICH
What is the recommended installation height for the De Dietrich DHD7000X range hood?
The recommended installation height is between 650 mm and 750 mm above the cooking surface for optimal performance and safety.
How do I clean the grease filters on the DHD7000X?
The grease filters are made of aluminium and can be cleaned in the dishwasher. Alternatively, you can wash them by hand with warm water and mild detergent. Ensure they are completely dry before reinstalling.
Can the DHD7000X be used in recirculation mode?
Yes, the DHD7000X can operate in recirculation mode when fitted with an activated charcoal filter. This is suitable for kitchens where extraction ducting is not possible.
How do I replace the charcoal filter in recirculation mode?
The charcoal filter is located behind the grease filters. Refer to the instruction manual, remove the grease filters, release the charcoal filter and replace it with a new one. Typically, the charcoal filter should be replaced every 3-6 months depending on usage.
Why is my DHD7000X hood noisy?
Excessive noise may be due to clogged filters, loose ducting connections, or a blocked vent. Clean or replace the filters, check the ducting and ensure proper installation. Also, try a lower speed setting.
How do I change the LED lights on the DHD7000X?
LED lights are integrated and long-lasting. If they need replacement, contact De Dietrich service center or a qualified technician. Do not attempt to replace them yourself unless the manual indicates otherwise.
What are the dimensions and weight of the DHD7000X?
The hood has a width of 700 mm, height of 620 mm and depth of 500 mm. It weighs approximately 15 kg.
Is the DHD7000X suitable for use with a gas hob?
Yes, but you must maintain the recommended distance: at least 650 mm between the hob and the bottom of the hood. Ensure good ventilation when using gas burners.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the reset button (if available) for a few seconds until the indicator turns off. Consult the user manual for the specific procedure for your model.
What ducting diameter is required for the extraction outlet?
The outlet requires a ducting diameter of 150 mm for optimal airflow. Use smooth, rigid ducting to minimize resistance and noise.
User questions about DHD7000X DE DIETRICH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DHD7000X - DE DIETRICH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DHD7000X by DE DIETRICH.
USER MANUAL DHD7000X DE DIETRICH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DE DIETRICH
Model : DHD7000X
Category : Range hood