X8 B - Turntable PRO-JECT - Free user manual and instructions
Find the device manual for free X8 B PRO-JECT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Turntable (Record Player) |
| Brand | Pro-Ject |
| Model | X8 B |
| Drive principle | Belt drive |
| Speeds | 33, 45 RPM |
| Platter | 300 mm acrylic platter |
| Tonearm | 9cc Evolution tonearm |
| Effective tonearm length | 230 mm |
| Overhang | 18 mm |
| Tracking force | 10-30 mN (adjustable) |
| Anti-skating | Integrated (adjustable) |
| Power supply | 110-240 V AC, 50/60 Hz |
| Power consumption | 2 W (0.3 W standby) |
| Dimensions (W x D x H) | 430 x 335 x 130 mm |
| Weight | 10.5 kg |
| Output | Phono RCA (gold-plated) |
| Speed control | Electronic speed change |
| Cleaning | Soft anti-static brush for records; microfibre cloth for platter |
| Maintenance | Check belt and bearing; oil main bearing occasionally |
| Safety | Keep away from moisture; disconnect during storms |
| Spare parts | Replacement belt, stylus, and cartridge available |
| Repair | Service through authorized Pro-Ject dealers |
| General information | Handcrafted in Europe; high-precision engineering |
Frequently Asked Questions - X8 B PRO-JECT
How do I set up the Pro-Ject X8 B turntable?
Place the turntable on a stable, level surface. Remove the transport screws, fit the platter and belt, and connect the RCA cables to your amplifier. Install the counterweight and set the tracking force according to the cartridge specifications. Finally, set the anti-skating to match and enjoy your vinyl.
How do I change the speed between 33 and 45 RPM?
The X8 B features an electronic speed switch. Simply press the power button and then use the speed selector to toggle between 33 1/3 and 45 RPM. The platter will reach the chosen speed automatically.
What is the correct tracking force for my cartridge?
The tracking force depends on your specific cartridge. For the pre-supplied cartridge (if any), use the recommended value printed in the manual. As a general rule, start with the middle value and adjust while listening for distortion. Use a stylus force gauge for accuracy.
How do I replace the drive belt?
First, lift the platter carefully. Slide the old belt off the motor pulley and platter rim. Place the new belt around the platter rim and then over the motor pulley. Ensure the belt is not twisted. Reinstall the platter and let the turntable run for a few minutes to align the belt.
Why is my turntable producing a hum?
Hum is often caused by a missing ground connection. Make sure the ground wire is connected to the ground terminal on your amplifier. Also check that the RCA cables are properly seated and that the cartridge wires are secure. Avoid routing cables near power cords.
How do I clean the platter?
Use a soft microfibre cloth to wipe the acrylic platter. For stubborn dust, slightly dampen the cloth with water. Never use abrasive cleaners. To clean records themselves, use a carbon fiber brush to remove dust before each play.
Can I use a moving coil cartridge with this turntable?
Yes, the X8 B is compatible with most moving magnet and moving coil cartridges. However, a separate phono preamp or high-gain MC input is required. Adjust the tracking force and anti-skating accordingly for your chosen cartridge.
How do I ground the turntable?
The X8 B includes a grounding wire that should be connected to the ground terminal (usually a small metal post) on your amplifier or phono preamplifier. If no terminal exists, buy a ground adapter. This prevents hum and ensures a clean signal.
What should I do if the turntable is not playing in stereo?
Check that the RCA cables are connected correctly to the left and right inputs. Also, inspect the cartridge wires: they must be attached to the correct pins (white, red, green, blue). A short in the cables can cause mono output; replace the RCA cables if necessary.
How do I maintain the tonearm bearing?
The tonearm bearings are sealed and require no regular maintenance. If you notice excessive friction or play, consult an authorized dealer. Avoid touching the bearing mechanism and apply no oil unless instructed by a professional.
User questions about X8 B PRO-JECT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual X8 B - PRO-JECT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X8 B by PRO-JECT.
USER MANUAL X8 B PRO-JECT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PRO-JECT
Model : X8 B
Category : Turntable