PRO-JECT

E1 BT - Turntable PRO-JECT - Free user manual and instructions

Find the device manual for free E1 BT PRO-JECT in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PRO-JECT E1 BT - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Turntable with Bluetooth
Drive System Belt drive
Speeds 33 1/3, 45 RPM
Bluetooth Yes, Bluetooth 5.0 aptX
Built-in Phono Preamp Yes, switchable
Tonearm 8.6" aluminum, gimbal bearing
Cartridge Ortofon OM 5E (pre-installed)
Platter ABS, 300 mm
Dimensions (W x H x D) 415 x 115 x 335 mm
Weight 5.0 kg
Power Supply External AC adapter, 15V DC / 0.5A
Power Consumption 5 W (standby < 0.5 W)
Outputs RCA (line/phono switchable), Bluetooth
Accessories Included Dust cover, RCA cable, power supply, manual
Maintenance Keep stylus clean; replace belt every 2-3 years
Safety Do not expose to moisture; unplug when not in use
Repairability Replaceable belt, cartridge, stylus; service by authorized dealer

Frequently Asked Questions - E1 BT PRO-JECT

How do I pair the E1 BT with my Bluetooth speaker or headphones?
On the turntable, press the Bluetooth button until it flashes. On your device, select 'Pro-Ject E1 BT' from the Bluetooth list. Once connected, the LED will stay solid. Adjust volume on your external device.
Note: The turntable must be in Bluetooth mode (button lit solid) to play.
Can I play 45 RPM records on this turntable?
Yes. Move the speed selector switch to '45'. Place the included 45 RPM adapter on the spindle if the record has a large center hole. For automatic speed detection, the E1 BT does not have this feature; manual switching is required.
How do I switch between the built-in phono preamp and an external one?
On the rear panel, locate the switch labeled 'Phono/Line'. Move it to 'Line' if you're connecting to an AUX input that expects line level. Move it to 'Phono' if you're using a separate phono preamp or a receiver with a phono input. Ensure it's set correctly to avoid distortion.
What should I do if the turntable is not spinning?
Check the power supply connection and ensure the outlet is live. Verify the belt is properly fitted around the motor pulley and platter. If the belt is loose or broken, replace it. Also ensure the platter is not obstructed and the on/off button is pressed.
How do I clean the stylus (needle)?
Use a stylus brush (carbon fiber recommended) and gently sweep from back to front. Do not use any liquid unless specifically designed for stylus cleaning. Clean before each play for optimal sound quality.
Is the dust cover removable?
Yes, the dust cover can be removed by lifting it straight up. It is hinged, but can be detached for easier cleaning or to reduce vibrations. However, keeping it closed when not playing protects the turntable from dust.
Why is there a humming sound coming from my speakers?
Hum can be caused by grounding issues. Ensure the turntable's ground wire (if present) is connected to the ground terminal on your amplifier. Also keep the turntable away from large transformers or motors. Using the built-in preamp in 'Line' mode may help.
How do I adjust the tracking force?
The tracking force is pre-set at the factory (about 18 mN for the Ortofon OM 5E). If you need to adjust, use the counterweight on the tonearm. First, balance the arm with no cartridge or stylus, then rotate the counterweight to set the desired force. Refer to the manual for specifics.
Can I use this turntable with a computer or smartphone?
Yes, via Bluetooth to any Bluetooth speaker or headphones. It can also be connected via the RCA output to a microphone/line input on a computer if you have a suitable adapter. The turntable outputs analogue audio.
What maintenance does the E1 BT require?
Regularly clean the stylus. Check the belt every few months for stretch or wear; replace if necessary (every 2-3 years). Keep the platter and bearing clean. Do not lubricate the motor or bearing. Store in a cool, dry place.

User questions about E1 BT PRO-JECT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Turntable in PDF format for free! Find your manual E1 BT - PRO-JECT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E1 BT by PRO-JECT.

USER MANUAL E1 BT PRO-JECT

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PRO-JECT

Model : E1 BT

Category : Turntable