H-CARD - Paint sprayer Paasche - Free user manual and instructions
Find the device manual for free H-CARD Paasche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | HVLP Paint Sprayer |
| Brand | Paasche |
| Model | H-CARD |
| Power Source | Electric (120V AC) |
| Current Draw | 1.8 A |
| Air Pressure Range | 20 - 55 PSI |
| Air Flow | 4.5 CFM |
| Fluid Cup Capacity | 25 oz (0.74 L) |
| Nozzle Sizes | 1.0 mm, 1.4 mm, 1.8 mm |
| Feed Type | Gravity feed |
| Spray Pattern Width | Adjustable from 4 to 12 inches |
| Hose Length | 8 ft (2.4 m) |
| Weight | 3.2 lbs (1.45 kg) |
| Dimensions (W x H x D) | 11 x 7 x 4.5 in (28 x 18 x 11 cm) |
| Paint Viscosity Range | 20 - 45 seconds (DIN cup) |
| Materials | Aluminum body, stainless steel needle |
| Cleaning | Disassemble and soak in solvent after each use |
| Safety Features | Pressure relief valve, trigger lock |
| Included Accessories | Spray gun, 25 oz cup, cleaning brush, wrench |
| Repair Service | Replacement parts available from Paasche dealer |
Frequently Asked Questions - H-CARD Paasche
How do I thin paint for the Paasche H-CARD sprayer?
Use the appropriate thinner recommended by the paint manufacturer. Aim for a viscosity of 20-45 seconds in a DIN flow cup. Stir thoroughly and strain through a paper filter to prevent clogging.
What is the proper cleaning procedure after use?
Immediately empty the cup and flush the system with solvent. Disassemble the nozzle and needle and soak them in cleaner. Wipe all parts dry and reassemble before storing.
What safety equipment should I wear when spraying?
Always wear a respirator mask with organic vapor cartridges, safety goggles, and protective gloves. Spray in a well-ventilated area to avoid inhaling fumes.
How can I adjust the spray pattern width?
Turn the pattern control knob on the rear of the gun. Rotate it clockwise for a narrower pattern and counterclockwise for a wider pattern (up to 12 inches).
Why is my H-CARD sputtering or spitting?
Sputtering is often caused by clogged nozzle or low fluid level. Clean the nozzle, ensure the cup is at least half full, and check that the air pressure is consistent.
What types of paint can I use with this sprayer?
The H-CARD works with latex, enamel, lacquer, and acrylic paints when properly thinned. Avoid extremely thick materials like texture coatings.
How do I replace the nozzle?
Unscrew the nozzle retaining ring counterclockwise, remove the old nozzle and replace it with the new size. Use the included wrench and ensure it is seated tightly before reassembling.
What does HVLP stand for and why is it beneficial?
HVLP means High Volume, Low Pressure. It uses a high volume of air to atomize paint at low pressure, providing a soft spray with less overspray and better material transfer efficiency.
How should I store the sprayer for long periods?
After thorough cleaning, apply a light coat of oil to the needle and internal parts to prevent corrosion. Store in a dry place with the cup removed and the trigger released.
Why is the sprayer producing a lopsided pattern?
A distorted pattern usually indicates a partially clogged nozzle or a damaged air cap. Clean or replace the air cap and ensure the nozzle is properly aligned.
User questions about H-CARD Paasche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint sprayer in PDF format for free! Find your manual H-CARD - Paasche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H-CARD by Paasche.
USER MANUAL H-CARD Paasche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Paasche
Model : H-CARD
Category : Paint sprayer