MIL-3AS - Paint gun Paasche - Free user manual and instructions
Find the device manual for free MIL-3AS Paasche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Airbrush (Gravity Feed) |
| Model | MIL-3AS |
| Brand | Paasche |
| Overall Length | Approx. 6.5 inches (165 mm) |
| Weight (without hose) | Approx. 0.25 lbs (113 g) |
| Air Supply | Compressed air (30-50 psi recommended) |
| Fluid Feed | Gravity feed (cup on top) |
| Nozzle Size | 0.55 mm (medium) |
| Needle/Nozzle System | Internal mix, conventional |
| Adjustable Pattern | Yes (by adjusting air and fluid flow) |
| Spray Pattern | Round to elliptical, depending on adjustments |
| Paint Cup Capacity | Approx. 1/2 oz (15 ml) |
| Body Material | Chrome-plated brass |
| Seal Material | PTFE (Teflon) |
| Cleaning | Disassemble and clean with solvent after each use |
| Maintenance | Lubricate moving parts with light oil; replace worn seals |
| Safety | Use in well-ventilated area; wear respirator; avoid inhalation |
| Spare Parts Available | Yes (needles, nozzles, seals, cups) |
| Warranty | Limetime manufacturer's warranty |
Frequently Asked Questions - MIL-3AS Paasche
How do I clean the Paasche MIL-3AS airbrush?
Disassemble the airbrush by unscrewing the head cap, removing the nozzle, needle, and cup. Rinse all metal parts with lacquer thinner or airbrush cleaner, then dry thoroughly. Use a soft brush for stubborn paint. Reassemble and run solvent through to clear the fluid path.
What air pressure should I use?
Recommended operating pressure is between 30 and 50 psi. Lower pressures (20-30 psi) for thin paints like inks and watercolors; higher pressures (40-50 psi) for thicker paints like acrylics and enamels.
Why is my airbrush spitting or splattering?
This usually indicates a clogged nozzle, bent needle, or dried paint inside the tip. Disassemble and clean thoroughly. Also check that the needle is properly seated and not damaged. Ensure paint viscosity is correct (thin like milk).
How do I adjust the spray pattern?
To widen the pattern, increase air pressure and/or turn the fluid control knob counterclockwise (more paint). To narrow, reduce air pressure or turn the fluid knob clockwise. Practice on scrap paper to fine-tune.
What paints can I use with the MIL-3AS?
This airbrush works with a wide range of paints including acrylics, enamels, watercolors, inks, and lacquers. Always thin paint to a consistency of skim milk before use.
How do I replace the needle or nozzle?
Unscrew the head cap and remove the nozzle using the included wrench. Pull out the needle from the back. Insert a new needle, then reattach the nozzle and cap. Ensure the needle moves freely and seals correctly.
Is the Paasche MIL-3AS double-action?
Yes, the MIL-3AS is a double-action airbrush. Pressing the trigger delivers air, and pulling back controls paint flow. This allows variable line width and opacity.
What does the 'AS' stand for in MIL-3AS?
'AS' stands for Air Seal, which refers to the air valve design that provides a consistent air flow and smooth trigger action.
Can I use an airbrush compressor with this model?
Yes, any airbrush compressor with a 1/8 inch NPT fitting and adjustable pressure (20-50 psi) works. A moisture trap is recommended to prevent water in the air line.
How often should I lubricate the airbrush?
After every few uses, apply a drop of airbrush lubricant or light machine oil to the needle and trigger mechanism. Wipe off excess to avoid contamination.
User questions about MIL-3AS Paasche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual MIL-3AS - Paasche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MIL-3AS by Paasche.
USER MANUAL MIL-3AS Paasche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Paasche
Model : MIL-3AS
Category : Paint gun