D220R - Paint gun Paasche - Free user manual and instructions
Find the device manual for free D220R Paasche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Paint Spray Gun |
| Brand | Paasche |
| Model | D220R |
| Category | Pneumatic Spray Gun |
| Nozzle Size | 1.4 mm |
| Fluid Tip Size | 1.4 mm |
| Cup Capacity | 400 ml (gravity feed) |
| Operating Air Pressure | 20-50 PSI (1.4-3.5 bar) |
| Air Consumption | 4-8 CFM (113-227 L/min) |
| Spray Pattern | Adjustable: round to fan |
| Material Type | Aluminum body, stainless steel needle |
| Weight | 1.1 lbs (0.5 kg) |
| Dimensions (LxWxH) | 7 x 5 x 10 inches (18 x 13 x 25 cm) |
| Air Inlet | 1/4 inch NPT |
| Spray Distance | 6-8 inches (15-20 cm) |
| Viscosity Range | 20-30 seconds (Ford #4 cup) |
| Maintenance | Clean immediately after use with compatible solvent |
| Safety | Use in well-ventilated area; wear respirator and gloves |
| Spare Parts | Needle, nozzle, air cap, fluid tip available |
| Included Accessories | Cleaning brush, wrench, air hose nipple |
Frequently Asked Questions - D220R Paasche
What is the recommended air pressure for the Paasche D220R?
The recommended operating air pressure is between 20 and 50 PSI (1.4-3.5 bar). Start at 30 PSI and adjust for desired atomization.
How do I clean the D220R spray gun?
Disassemble the gun, remove the nozzle and needle, and clean all parts with a compatible solvent. Use the included brush to clear any dried paint. Reassemble after drying.
What type of paint can I use with this gun?
The D220R can spray most automotive paints, primers, clear coats, and wood finishes. Thin to the correct viscosity (20-30 seconds with a Ford #4 cup) for best results.
How do I adjust the spray pattern?
Turn the pattern adjustment knob (located at the rear of the gun) clockwise for a round pattern and counterclockwise for a fan pattern. Adjust the fluid control knob for paint flow.
Why is my spray gun spitting?
Spitting can be caused by a loose nozzle, dried paint in the air cap, or low air pressure. Tighten the nozzle, clean the air cap, and ensure air pressure is above 20 PSI.
What is the cup capacity of the D220R?
The gravity feed cup has a capacity of 400 ml (13.5 oz). Do not overfill to avoid spilling.
Can I spray latex paint with this gun?
Latex paint is too thick for this gun without thinning. If thinning, use water and a flow improver, but a dedicated HVLP gun is recommended for latex.
How often should I lubricate the gun?
Lubricate the trigger pivot and air valve with a few drops of light oil after every cleaning to prevent sticking.
What spare parts are available for the D220R?
Spare parts include needles, nozzles, air caps, fluid tips, and complete seal kits. They can be ordered from Paasche distributors.
Is the Paasche D220R suitable for fine detail work?
The D220R is a general-purpose spray gun best for medium to large areas. For fine detail, consider a smaller nozzle size or a dedicated airbrush.
User questions about D220R Paasche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual D220R - Paasche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D220R by Paasche.
USER MANUAL D220R Paasche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Paasche
Model : D220R
Category : Paint gun