H-100D - Paint gun Paasche - Free user manual and instructions
Find the device manual for free H-100D Paasche in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Detail Paint Gun (Airbrush) |
| Model | H-100D |
| Brand | Paasche |
| Action Type | Double-action (independent air and paint control) |
| Feed Type | Gravity feed |
| Cup Capacity | 7 ml (1/4 oz) |
| Operating Pressure | 15–50 PSI (1.0–3.4 bar) |
| Spray Pattern | Adjustable round to fan |
| Needle Size | 0.55 mm (standard) |
| Body Material | Brass and stainless steel |
| Weight | 128 g (4.5 oz) |
| Dimensions | 165 mm x 38 mm (6.5 in x 1.5 in) |
| Air Connection | 1/8 in NPT internal thread |
| Maintenance | Disassemble and clean with solvent after each use; lubricate needle packing with lightweight oil |
| Safety | Use with adequate ventilation; wear a respirator and eye protection; never point at people |
| Replacement Parts | Needle, nozzle, trigger, cup, and air valve available from Paasche |
| Warranty | 2-year limited warranty against defects |
Frequently Asked Questions - H-100D Paasche
What type of paint can I use with the Paasche H-100D?
The H-100D works with water-based, solvent-based, and enamel paints. Always thin paints to a milk-like consistency before use.
How do I clean the H-100D after use?
Disassemble the airbrush: remove the cup, needle, and nozzle. Rinse all parts with solvent or water depending on paint type. Use a cleaning brush to remove dried paint. Reassemble after drying.
What is the recommended operating pressure?
Operate at 15–50 PSI (1.0–3.4 bar). Start at 20 PSI for thin paints and increase for thicker materials.
Can I adjust the spray pattern?
Yes, the H-100D has an adjustable spray pattern. Turn the rear knob to change from a round dot to a wide fan pattern.
Is the H-100D double-action?
Yes, it is a double-action airbrush. Press the trigger down for air, pull back for paint. This allows independent control of airflow and paint volume.
What needle size does the H-100D use?
It comes with a 0.55 mm needle and nozzle set. Other sizes (e.g., 0.35 mm, 0.75 mm) are available separately.
How do I prevent clogging?
Always strain your paint before use, and clean the airbrush immediately after each session. Avoid letting paint dry in the nozzle.
Can I use the H-100D for automotive touch-up?
Yes, with the appropriate thin automotive paint. Use an air pressure of 30–40 PSI and test on scrap material first.
Where can I buy replacement parts?
Replacement parts are available from Paasche dealers, online retailers, or the official Paasche website. Common parts include needles, nozzles, and cups.
Is the H-100D compatible with air compressors?
Yes, it connects to any compressor with a 1/8 in NPT fitting. Use a moisture trap and regulator for best results.
User questions about H-100D Paasche
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual H-100D - Paasche and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H-100D by Paasche.
USER MANUAL H-100D Paasche
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Paasche
Model : H-100D
Category : Paint gun