CECOTEC Forcesilence 1020 Extremeconnected - Ceiling fan

Forcesilence 1020 Extremeconnected - Ceiling fan CECOTEC - Free user manual and instructions

Find the device manual for free Forcesilence 1020 Extremeconnected CECOTEC in PDF.

📄 40 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CECOTEC Forcesilence 1020 Extremeconnected - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Cecotec
Model EnergySilence 1010/1020 Extreme Connected (ref. 05913/05914)
Product type Pedestal fan
Power supply 220-240 V, 50 Hz, class II
Rated power 60 W
Measured power consumption 56.5 W
Speeds 6 speeds
Operating modes Normal, Eco, Night
Timer Programmable from 1 h to 15 h (1, 2, 4, 8 h)
Oscillation Yes, activation via button or remote control
Remote control Wireless, with batteries
Maximum air flow 50.1 m³/min
Service value (SV) 0.9 (m³/min)/W
Standby power consumption 0.2 W
Sound power level 64 dB(A)
Maximum air velocity 3.1 m/s
Measurement standard IEC 60879
Adjustable height Yes, with thumbscrew
Maintenance Soft damp cloth, unplug before cleaning
Safety Household use only, do not use near water
Box contents Fan, remote control, instruction manual

Frequently Asked Questions - Forcesilence 1020 Extremeconnected CECOTEC

How do I clean the Cecotec EnergySilence 1020 Extreme Connected fan?
To clean the fan, turn it off and unplug it from the outlet. Use a soft, damp cloth to wipe the surface. Never immerse the appliance in water or use abrasive products.
What should I do if the remote control stops working?
First check the remote control batteries: respect the polarity (+/-) and replace them if necessary. Make sure nothing is blocking the signal between the remote control and the fan.
How do I adjust the fan height?
Pull the height adjustment bar upward, set it to the desired height, then tighten the height adjustment thumbscrew to lock it in place.
What operating modes are available?
The fan offers three modes: Normal, Eco, and Night. You can select them using the Mode button on the control panel or via the remote control.
How do I set the timer?
Press the Timer button to activate the function. You can set durations of 1, 2, 4, or 8 hours, which can be combined up to 15 hours. The timer is displayed on the screen.
Can I use this fan in a humid room like a bathroom?
No, this fan is designed for household use only. It should not be used near water, open windows, or curtains to avoid any risk of electric shock.
How do I install the fan blades and grille?
Follow the manual: first attach the rear grille to the motor shaft, fit the large blades then the small ones, screw them in counterclockwise, and finally install the front grille by closing the fixing ring.
What does the indicator light on the control panel mean?
The indicator shows the selected speed or the active mode (Normal, Eco, Night). It lights up when the corresponding function is activated.
What is the standby power consumption?
Standby power consumption is very low: 0.2 W, which helps reduce energy consumption when the appliance is not in use.
How do I contact Cecotec after-sales service?
In case of an incident or breakdown, contact the official Cecotec After-Sales Service at +34 963 21 07 28. It is recommended to have repairs carried out by qualified personnel.

User questions about Forcesilence 1020 Extremeconnected CECOTEC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Ceiling fan in PDF format for free! Find your manual Forcesilence 1020 Extremeconnected - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Forcesilence 1020 Extremeconnected by CECOTEC.

USER MANUAL Forcesilence 1020 Extremeconnected CECOTEC

  1. Parts and components 37
  2. Before use 37
  3. Product assembly 38
  4. Operation 38
  5. Cleaning and maintenance 39
  6. Technical specifications 39
  7. Disposal of old electrical and electronic appliances 40
  8. Technical support and warranty 40
  9. Copyright 40

SOMMAIRE

Read these instructions thoroughly before using the product. Keep this instruction manual for future reference or new users.

  • All safety instructions must be closely followed when using the appliance.
  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
  • This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
  • Make sure that the mains voltage matches the voltage stated on the product marking and that the wall outlet is grounded.
  • Check the power cord regularly for visible damage. If the cord is damaged, it must be repaired by the official Technical Support Service of Cecotec to avoid any type of danger.
  • Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose electrical connections to water. Make sure your hands are completely dry before handling the plug or switching on the appliance.
  • If the appliance falls accidentally into water, unplug it immediately. Do not touch the water!
  • Do not operate the device if any fault or unusual sign is detected.
  • Keep hair, loose clothing, fingers, and other parts of the body

away from the openings and moving parts of the device.

  • Make sure the appliance is placed on a flat and stable surface during operation.
  • Do not use the device next to windows, as exposure to rain could cause electric shock.
  • Do not operate the product under or next to curtains.
  • Do not cover the grilles and do not place the product cord under carpets or other objects during operation. Keep the sides, front, and back of the appliance at a minimum safety distance of 20 cm from any object or wall.
  • Always turn off and unplug the device when not in use and before moving it to a new location. Pull from the plug, not the cord, to disconnect it from the outlet.

Instructions on batteries

  • Battery ingestion can cause burns, soft-tissue perforation, and death. It can cause severe burns within two hours of the ingestion.
  • In case of battery ingestion, please seek medical attention immediately.
  • Do not allow children to replace batteries without adult supervision.
  • Do not disassemble, open, or damage the batteries.
  • Keep the batteries out of the reach of children. Pay particular attention to small batteries. In case of battery ingestion, please seek medical attention immediately.
  • Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
  • Do not short-circuit an element or a battery. Do not store batteries in an untidy manner, in a box, or drawer where they can short-circuit each other or be short-circuited by other metal objects.

  • Do not subject batteries to mechanical shock.

  • Both batteries and cells can leak under extreme conditions. In the event of a battery leak, keep your skin and eyes away from the liquid. If the liquid gets into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.
  • Pay attention to the positive (+) and negative (-) marks on the batteries and the remote-control compartment to ensure they are inserted correctly.
  • Do not use any batteries that are not designed for use with the appliance.
  • Do not use the remote control if powered with batteries that differ in capacity, size, or type.
  • Children should be allowed to handle the batteries only under adult supervision.
  • Always buy recommended batteries.
  • Keep the batteries clean and dry. Wipe the battery terminals with a clean, dry cloth if they become dirty.
  • Keep the original instruction manual for future reference.
  • Use the batteries only for their intended purpose.
  • Whenever possible, remove the batteries when not in use.

INSTRUCTIONS DE SÉCURITÉ

  1. Front grille
  2. Small blades
  3. Large blades
  4. Back-grille fixing nut
  5. Back grille
  6. Motor shaft
  7. Fan-head upper part
  8. Fan-head lower part
  9. Adjustment knob
  10. Height-adjustment knob
  11. Fan support
  12. Fan base
  13. Fixing plate

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

  • This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
  • Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, please contact Cecotec's official Technical Support Service immediately.

Box contents

  • EnergySilence 1010/1020 Extreme Connected fan
  • Remote control
  • Instruction manual

3. PRODUCT ASSEMBLY

Fig. 2

The fan is packed disassembled and must be properly assembled following the instructions on this manual to ensure its correct operation.

WARNING

Do not operate the product unless completely assembled. Always operate it in an upright position to avoid injuries and accidents.

  1. Use the screws and the fixing plate to assemble the fan support to the base. Pull the height-adjustment bar upward to the desired height, then use the height-adjustment knob to lock it in place.
  2. Place the fan body on the support. The fan support must be inserted in the fan body in such way that the whole device is stable. Use the adjustment knob to tightly fix both parts.
  3. Install the back grille on the motor shaft and use the back-grille fixing nut to fix it tightly.
  4. Place the large blades in their position making sure the grooves at the centre match the ones on the back-grille fixing nut. Then, place the smaller ones next and screw them counterclockwise to fix them securely.
  5. Lastly, install the front grille in its position and use the grille clamping ring to hold both grilles together. Fasten the grille so that it is properly attached.

4. OPERATION

NOTE

Make sure all the parts are properly assembled and in good conditions before operating the device.

Control panel

Fig. 3

  1. Normal mode
  2. Programmed hours
  3. Modes
  4. Power on/off
  5. Oscillation
  6. Eco mode
  7. Sleep mode
  8. Selected speed
  9. Speed setting
  10. Timer

Remote control

Fig. 4

  1. Increase time/speed
  2. Decrease time/speed
  3. Oscillation
  4. Power on/off
  5. Timer
  6. Mode

Functions and mode

  • All the following functions and modes can be operated from the control panel and from the remote control.
  • Press the power button to turn the device on or off.
  • Press the speed button to select the fan air speed, from 1 to 6.
  • The speed light indicator will light up while this function is in operation.
  • Press the mode button to select between 3 operating modes: Normal, Eco, and Sleep. The mode light indicator will light up according to the selected mode.
  • Press the oscillation button to activate the oscillation function. The oscillation light indicator will light up while it is in operation.
  • Press the timer button to activate or deactivate this function. It can be programmed for 1, 2, 4, or 8 hours than can be added up to programme this function for a total of 15 hours. The display will light up the selected timer option.

5. CLEANING AND MAINTENANCE

  • Always turn the device off and unplug it from the power supply before carrying out cleaning and maintenance tasks.
  • Use a soft, damp cloth to clean the surface of the device.

6. TECHNICAL SPECIFICATIONS

Product reference: 05913/05914

Product: EnergySilence 1010/1020 Extreme Connected

60 W,220-240 V, 50 Hz Class II

DescriptionSymbolValueUnit
Fan maximum flowF50.1 m^3/min
Fan power consumptionP56.5W
Service valueSV0.9(m3/min)/W
Power consumption on standby mode P_SB 0.2W
Fan sound power level L_WA 64dB (A)
Maximum air speedC3.1m/seg
Service value measurement standardIEC 60879
Contact details to obtain more informationCecotec Innovaciones SL.C/ de la Pinadeta s/n, 46930Quart de Poblet, Valencia (Spain)

Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

CECOTEC Forcesilence 1020 Extremeconnected - DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES - 1

This symbol indicates that, according to the applicable regulations, the product and/or cells must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec's official Technical Support Service at +34 963 210 728.

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

60 W,220-240 V, 50 Hz Class II

Prodotto: EnergySilence 1010/1020 Extreme Connected

60 W,220-240 V, 50 Hz Class II

Product: EnergySilence 1010/1020 Extreme Connected

60 W,220-240 V, 50 Hz Class II

60 W,220-240 V, 50 Hz Class II

60 W,220-240 V, 50 Hz Class II

CECOTEC Forcesilence 1020 Extremeconnected - PIÈCES ET COMPOSANTS - 1

CECOTEC Forcesilence 1020 Extremeconnected - PIÈCES ET COMPOSANTS - 2

Fig./Img./Abb./Rys./Obr. 2

CECOTEC Forcesilence 1020 Extremeconnected - PIÈCES ET COMPOSANTS - 3

Fig./Img./Abb./Rys./Obr. 3

CECOTEC Forcesilence 1020 Extremeconnected - PIÈCES ET COMPOSANTS - 4

Fig./Img./Abb./Rys./Obr. 4

www.cecotec.es

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CECOTEC

Model : Forcesilence 1020 Extremeconnected

Category : Ceiling fan