JT30L400147 - Water heater Jocel - Free user manual and instructions
Find the device manual for free JT30L400147 Jocel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Jocel |
| Model | JT30L400147 |
| Product Type | Electric Water Heater |
| Capacity | 30 liters |
| Power Consumption | 2000 W |
| Power Supply | 220-240 V AC, 50 Hz |
| Temperature Range | 30°C to 75°C |
| Adjustable Thermostat | Yes |
| Safety Features | Overheat protection, pressure relief valve |
| Heating Element | Copper/Stainless steel immersion heater |
| Insulation | Polyurethane foam for heat retention |
| Installation Type | Wall-mounted |
| Connection Type | Direct mains connection |
| Dimensions (Approx.) | Diameter 400 mm, Height 500 mm |
| Weight (Approx.) | 10 kg |
| Water Connection | 1/2 inch BSP inlet/outlet |
| Maximum Pressure | 0.6 MPa (6 bar) |
| Energy Efficiency | Class B (est.) |
| Maintenance | Drain tank regularly, replace anode as needed |
| Spare Parts | Thermostat, heating element, anode rod, safety valve |
| Repairability | Modular design for easy access to components |
Frequently Asked Questions - JT30L400147 Jocel
How to set the desired water temperature?
Use the thermostat knob located on the front panel. Turn to adjust between 30°C and 75°C. Recommended setting is 60°C to prevent bacteria growth.
Why is the safety valve dripping?
The valve releases pressure if the tank exceeds 0.6 MPa. If dripping constantly, it might be defective or the pressure is too high. Check the inlet pressure and replace if necessary.
How to drain the water heater for maintenance?
Switch off the power, close the water inlet, attach a hose to the outlet, and open the drain valve. It is advised to drain the tank every 3 months to remove sediment.
What does the overheat protection do?
It automatically cuts off the power if the water temperature exceeds 85°C, preventing damage and ensuring safety.
Can this water heater be installed horizontally?
No, the unit is designed for vertical installation only to ensure proper water circulation and function of the heating element.
How long does it take to heat the full tank?
With a 2000W element and 30L capacity, the approximate heating time from cold to 60°C is about 45 minutes depending on ambient temperature.
What is the maximum working pressure?
The maximum working pressure is 0.6 MPa. Use a pressure reducing valve if your mains pressure is higher.
How to replace the heating element?
First, disconnect the power and drain the tank. Remove the cover plate, disconnect wires, and unscrew the flange. Install the new element with a fresh gasket and retighten. Always consult a qualified electrician.
Does it require an anode rod?
Yes, the model includes a magnesium anode rod to protect the tank from corrosion. Inspect it every year and replace if it is 60% consumed.
What is the energy efficiency class?
The estimated energy efficiency class is B under EU energy labeling, meaning decent thermal insulation and acceptable heat loss.
User questions about JT30L400147 Jocel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual JT30L400147 - Jocel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JT30L400147 by Jocel.
USER MANUAL JT30L400147 Jocel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jocel
Model : JT30L400147
Category : Water heater