Studio Force II 72 - Ignition Chrome-Q - Free user manual and instructions
Find the device manual for free Studio Force II 72 Chrome-Q in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Studio flash monolight |
| Brand | Chrome-Q |
| Model | Studio Force II 72 |
| Power Output | 72 Ws |
| Guide Number | 32 (ISO 100, meters, with 35mm reflector) |
| Flash Duration | 1/800 to 1/2000 s (t0.1) |
| Recycle Time | 0.4–1.5 s depending on output level |
| Full-Power Flashes | Up to 500 per battery charge |
| Battery | Built-in 11.1 V / 2900 mAh Li-ion |
| Modeling Lamp | 7 W LED, adjustable 0-100% |
| Color Temperature | 5600 K ± 200 K |
| Power Adjustment | 1/1 to 1/32 in 0.1 increments |
| Wireless Control | Built-in 2.4G transceiver, 16 channels |
| Light Mount | Bowens mount |
| Sync Modes | Optical slave, sync cord, wireless trigger |
| Display | LCD with backlight |
| Dimensions | 140 × 180 × 240 mm (without reflector) |
| Weight | 1.1 kg (without reflector) |
| Included Accessories | Reflector, stand adapter, protective cover |
| Safety Features | Overheat protection, short-circuit protection |
| Maintenance | Clean exterior with dry cloth; keep contacts dry |
Frequently Asked Questions - Studio Force II 72 Chrome-Q
How do I adjust the flash power output?
Press the power button, then use the dial or up/down keys to set the desired output level. You can choose from 1/1 to 1/32 in 0.1 increments. The LCD shows the current output.
What is the maximum sync speed when using the wireless trigger?
With the built-in 2.4G wireless system, the maximum sync speed is typically 1/250 s on most cameras. Use high-speed sync if supported and appropriate.
How long does the battery take to charge?
The built-in Li-ion battery takes about 2.5 hours to fully charge with the included 1A charger. You can check the charging status via the indicator light.
Can I use softboxes and other modifiers with this flash?
Yes, the Studio Force II 72 features a Bowens mount, which is compatible with a wide range of softboxes, beauty dishes, and reflectors from most brands.
How do I trigger the flash from my camera?
You can use three methods: connect a sync cable, use the optical slave function, or use the built-in 2.4G wireless with a compatible remote trigger on the camera.
Does the modeling lamp work when running on battery?
Yes, the 7 W LED modeling lamp operates in battery mode. Its brightness can be adjusted from 0 to 100% without affecting the flash power.
How many groups and channels are available for the wireless system?
The flash supports 6 groups (A-F) and 16 channels, giving you flexible control when using multiple units in the same area.
Can I use a different mount system like a Profoto or Godox softbox?
You can use an adapter to convert Bowens mount to other types. However, using the native Bowens mount is recommended for stability and safety.
What should I do if the flash does not fire?
First check the battery level and power switch. Ensure the sync mode is correctly set and the trigger signal is reaching the unit. If using optical slave, increase the sensitivity.
Can I use this flash as an optical slave with other brand flashes?
Yes, the optical slave reacts to any bright flash from another unit. You can set the slave mode and adjust the sensitivity to prevent misfires.
User questions about Studio Force II 72 Chrome-Q
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual Studio Force II 72 - Chrome-Q and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Studio Force II 72 by Chrome-Q.
USER MANUAL Studio Force II 72 Chrome-Q
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chrome-Q
Model : Studio Force II 72
Category : Ignition